e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 49–Transportation
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

49 CFR (PARTS 572–599)
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION


All materials are available from the Office of Rulemaking, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590
49 CFR
American Association of Textile Chemists and Colorists
Post Office Box 886, Durham, NC
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
ASTM E 274–79 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full–Scale Tire
575.104
ASTM E 501–76 Standard Tire for Pavement Skid Resistance Tests
575.104(f)(1)(ii) and (vii)
ASTM F 377–74 Standard Method for Calibration of Braking Force for Testing of Pneumatic Tires
575.104(f)(1)(v)
General Motors Corporation
c/o Docket 74–14, Docket Section, National Highway Traffic Safety Administration, Room 5109, 400 Seventh Street SW., Washington, DC 20590
The Anthropomorphic Test Dummy Parts List, dated December 15, 1987, and a Parts List Index, dated December 15, 1987
572.31(a)
The Anthromorphic Test Dummy Parts List, dated April 22, 1986
572.31(a)
The Anthromorphic Test Dummy Parts List, dated September 9, 1996
572.31(a)
A listing of Optional Hybrid III Dummy Transducers, dated April 22, 1986
572.31(a)
A General Motors Drawing Package identified by GM drawing No. 78051–218 revision R and subordinate drawings
572.31(a)
A General Motors Drawing Package identified by GM drawing No. 78051–218 revision S, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978
572.31(a)
GE Drawing No. 78051–218, Revision U, and subordinate drawings dated August 30, 1998
572.31; 572.34
Drawing No. 78051–55, “Instrumentation Assembly – Pelvic Accelerometer”, dated August 2, 1979
Part 572
Drawing No. 78051–59, Revision G, Pelvic Assembly–Complete–Hybrid III, dated June 30, 1998
572.31
Drawing No. 78051–60, Revision E, Pelvic Structure–Molded ASM–Hybrid III, dated June 30, 1998
572.31
Drawing No. 78051–61, Revision T, “Head Assembly”, complete, dated May 20, 1978
Part 572
Drawing No. 78051–61X, Revision C, “Head Assembly”, complete, dated March 28, 1997
Part 572, subpart M
Drawing No. 78051–70 , Revision E, “Lower Torso Assembly”, complete, dated August 20, 1996
Part 572
Drawing No. 78051–70, Revision F, Lower Torso Assembly–Complete–Hybrid III, dated June 30, 1998
572.31
Drawing No. 78051–89, Revision K, “Upper Torso Assembly”, complete, dated May 20, 1978
Part 572
Drawing No. 78051–90, Revision A, “Neck Assembly”, complete, dated May 20, 1978
Part 572; part 572, subpart M
Drawing No. 78051–123, Revision D, “Arm Assembly”, complete, dated May 20, 1978
Part 572
Drawing No. 78051–124, Revision D, “Arm Assembly”, complete, dated May 20, 1978
Part 572
Drawing number 78051–383X, Revision P, titled “Neck Transducer Structural Replacement”, dated November 1, 1995
Part 572, subpart M
Drawing 86–5001–001, Revision A, “Leg Assembly”, complete, dated March 26, 1996
Part 572
Drawing 86–5001–002, Revision A, “Leg Assembly”, complete, dated March 26, 1996
Part 572
A General Motors Drawing No. 78051–218, Revision T, “Hybrid III Anthromorphic Test Dummy”, dated May 20, 1978
572.31; 572.34
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated July 15, 1986
572.31(a)
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated September 1996
572.31(a)
Disassembly, Inspection, Assembly and Limbs Adjustment Procedures for the Hybrid III dummy, dated April 1997
572.31(a)
Sign Convention for the signal outputs of Hybrid III dummy transducers, dated July 15, 1986
572.31(a)
Exterior Dimensions of the Hybrid III dummy, dated July 15, 1986
572.31(a)
National Highway Traffic Safety Administration
Office of Vehicle Safety Standards, DOT–NHTSA, 400 7th St. SW., Washington, DC 20590
Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re), September 2006
572, Subpart U
Parts/Drawings List, Part 572 Subpart V, SID–IIsD, September 2006
572, Subpart V
Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES–2re, Alpha Version), September 2006, consisting of:
  (i) Drawing No. 175–0000 ES–2re Dummy Assembly
572, Subpart U
  (ii) Drawing No. 175–1000 Head Assembly
572, Subpart U
  (iii) Drawing No. 175–2000, Neck Assembly Test/Cert
572, Subpart U
  (iv) Drawing No. 175–3000, Shoulder Assembly
572, Subpart U
  (v) Drawing No. 175–3500, Arm Assembly, Left
572, Subpart U
  (vi) Drawing No. 175–3800, Arm Assembly, Right
572, Subpart U
  (vii) Drawing No. 175–4000, Thorax Assembly with Rib Extensions
572, Subpart U
  (viii) Drawing No. 175–5000, Abdominal Assembly
572, Subpart U
  (ix) Drawing No. 175–5500 Lumbar Spine Assembly
572, Subpart U
  (x) Drawing No. 175–6000 Pelvis Assembly
572, Subpart U
  (xi) Drawing No. 175–7000–1, Leg Assembly—left
572, Subpart U
  (xii) Drawing No. 175–7000–2, Leg Assembly—right
572, Subpart U
  (xiii) Drawing No. 175–8000, Neoprene Body Suit
572, Subpart U
  (xiv) Drawing No. 175–9000, Headform Assembly
572, Subpart U
Drawings and Specifications for SID–IIsD Small Female Crash Test Dummy, Part 572 Subpart V, September 2006, consisting of:
  (i) Drawing No. 180–0000, SID–IIsD Complete Assembly
572, Subpart V
  (ii) Drawing No. 180–1000, 6 Axis Head Assembly
572, Subpart V
  (iii) Drawing No. 180–2000, Neck Assembly
572, Subpart V
  (iv) Drawing No. 180–3000, Upper Torso Assembly
572, Subpart V
  (v) Drawing No. 180–3005, Washer, Clamping
572, Subpart V
  (vi) Drawing No. 9000021, Screw, SHCS 3/8–16 x 1 NYLOK
572, Subpart V
  (vii) Drawing No. 900005, Screw, SHCS 1/4–20 x 5/8 NYLOK
572, Subpart V
  (viii) Drawing No. 180–4000, Lower Torso Assembly Complete
572, Subpart V
  (ix) Drawing No. 180–5000–1, Complete Leg Assembly, Left
572, Subpart V
  (x) Drawing No. 180–5000–2, Complete Leg Assembly, Right
572, Subpart V
  (xi) Drawing No. 180–6000–1, Arm Assembly Left Molded
572, Subpart V
  (xii) Drawing No. 180–6000–2, Arm Assembly Right Molded
572, Subpart V
  (xiii) Drawing No. 180–9000, SID–IIsD Headform Assembly
572, Subpart V
Procedures for Assembly, Disassembly and Inspection (PADI) of the EuroSID–2re 50th Percentile Adult Male Side Impact Crash TestDummy, September 2006
572, Subpart U
Procedures for Assembly, Disassembly and Inspection (PADI) of the SID–IIsD Side Impact Crash Test Dummy, September 2006
572, Subpart V
A User's Manual entitled “Free–Motion Headform User's Manual,” version 2, March 1995
572.100; 572.101, 572.103
Reprographic Technologies
9107 Gaither Road, Gaithersburg, MD 20877, Telephone (301) 419–5070, FAX (301) 419–5069
Drawings and Specifications:
  SA 150 M010—Head Assembly, 1973
Part 572
  SA 150 M020—Neck Assembly, 1973
Part 572
  SA 150 M030—Shoulder–thorax Assembly, 1973
Part 572
  SA–SID–M030, Revision A, titled “Thorax Assembly”, complete, dated May 18, 1994
Part 572, subpart M
  SA 150 M050—Lumbar Spine Assembly, 1973
Part 572
  SA–SID–M050, Revision A, titled “Lumbar Spine Assembly”, dated May 18, 1994
Part 572, subpart M
  SA–SID–M050— Lumbar Spine Assembly drawing, Revision B, dated September 12, 1996
Part 572
  SA–SID–053 “Lumbar Spine Assembly”, Revision A, dated May 18, 1994
Part 572, subpart M
  SA 150 M060—Pelvis and Abdomen Assembly, 1973
Part 572
  SA–SID–M060, Revision A, “Pelvis and Abdomen Assembly”, dated May 18, 1994
Part 572, subpart M
  SA 150 M070—Right Arm Assembly, 1973
Part 572
  SA 150 M071—Left Arm Assembly, 1973
Part 572
  SA 150 M080—Right Leg Assembly, 1973
Part 572
  SA–SID–M080, “Leg Assembly, Right”, dated August 13, 1987
Part 572, subpart M
  SA 150 M081—Left Leg Assembly, 1973
Part 572
  SA–SID–M081, “Leg Assembly, Left”, dated August 13, 1987
Part 572, subpart M
  Operation and Maintenance Manual for 3–year–old Test Dummy, SA 103C, Contract No. DOT–HS–6–01294, dated May 28, 1976
Part 572
  SA 103C 010 Head Assembly, 1976
Part 572
  SA 103C 020 Neck Assembly, 1976
Part 572
  SA 103C 030 Torso Assembly, 1976
Part 572
  SA 103C 141 Upper Arm Assembly Left, 1976
Part 572
  SA 103C 142 Upper Arm Assembly Right, 1976
Part 572
  SA 103C 051 Forearm Hand Assembly Left, 1976
Part 572
  SA 103C 052 Forearm Hand Assembly Right, 1976
Part 572
  SA 103C 061 Upper Leg Assembly Left, 1976
Part 572
  SA 103C 062 Upper Leg Assembly Right, 1976
Part 572
  SA 103C 071 Lower Leg Assembly Left, 1976
Part 572
  SA 103C 072 Lower Leg Assembly Right, 1976
Part 572
  SA 103C 081 Foot Assembly Left, 1976
Part 572
  SA 103C 082 Foot Assembly Right, 1976
Part 572
Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001
572.150
Parts List and Drawings, Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001, consisting of:
  Drawing No. 921022–001, Head Assembly
572.150, 572.151, 572.152, 572.154, 572.155
  Drawing No. 921022–041, Neck Assembly
572.150, 572.151, 572.153, 572.154, 572.155
  Drawing No. TE–3200–160, Headform
572.150, 572.151, 572.153
  Drawing No. 921022–060, Torso Assembly
572.150, 572.151, 572.154, 572.155
  921022–055, Leg Assembly
572.150, 572.151, 572.155
  921022–054, Arm Assembly
572.150; 572.151; 572.155
  The CRABI–12 Test Dummy Parts List
572.150
Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart R, CRABI 12–month–old Infant Crash Test Dummy (CRABI–12, Alpha version), August 2001
572.150, 572.151
Parts List and Drawings, Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001, including:
  Drawing No. 210–1000, Head Assembly
572.140, 572.141, 572.142, 572.144, 572.145, 572.146
  Drawing No. 210–2001, Neck Assembly
572.140, 572.141, 572.143, 572.144, 572.145, 572.146
  Drawing No. 210–3000, Upper/Lower Torso Assembly
572.140, 572.141, 572.143
  Drawing No. 210–5000–1(L), –2(R), Leg Assembly
572.140, 572.141, 572.144, 572.145, 572.146
  Drawing No. 210–6000–1(L), –2(R), Arm Assembly
572.140, 572.141, 572.144, 572.145
  The Hybrid III Three–year–old Dummy Parts List
572.140
Procedures for Assembly, Disassembly, and Inspection (PADI), Subpart P, Hybrid III 3–year–old Child Crash Test Dummy (H–III3C, Alpha version), September 2001
572.140, 572.141
AGA, 572.141RD–AR–330 Hybrid III Dummy Transducers list, Anthropomorphic Dummies for Crash and Escape System Testing, Chapter 6, table 6–2, North Atlantic Treaty Organization, July 1996
572.31
Construction of an Infant Dummy (Mark II) for Dynamic Tests of Crash Restraint Systems, July 2, 1974
Part 572
SA 106, C001, C010, C020, C030, C041, C042, C050, C060, C071 and C072 establishing specifications for an anthropomorphic test dummy representing a 6–year–old child
Part 572
SA 106C 001, “Crash Test Dummy Ass'y. 6 Yr. Old Child”, sheets 1 through 7, released July 11, 1997, technical drawings and specifications, parts list package, and list of measurement definitions (“Landmark Definitions” (sheet 18) for anthropomorphic test dummy representing 6–year–old child
572.71; 572.74; 572.78
Drawings and Specifications for the Hybrid III 6–year–old child dummy (H–III6C) Subpart I, Beta Version, June 2002 consisting of:
  Drawing No. 127–1000, Head Assembly
572.120
  Drawing No. 127–1015–Neck Assembly
572.120
  Drawing No. 127–2000, Upper Torso Assembly
572.120
  Drawing No. 127–3000, Lower Torso Assembly
572.120
  Drawing No. 127–4000, Leg Assembly
572.120
  Drawing No. 127–5000, Arm Assembly
572.120
  The Hybrid III Six–year–old Parts List
572.120
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III 6–year–old Child Crash Test Dummy, Beta version (June 2002)
572.120
SA 106C 010, Revision A (sheet 8) Head Assembly, 1989
Part 572
SA 106C 020, Revision A (sheet 9) Neck Assembly, 1989
Part 572
SA 106C 030, Revision C (sheet 10) Thorax Assembly, 1996 (including 6C–1610–1 through –4 Screw Button Head Socket, 1996, and 6C–1021 Ballast, 6–year–old Thoraxc [for 7267A], 1996)
Part 572
SA 106C 030, Revision D (sheet 11) Thorax Assembly, 1996 (including 6C–909, Revision A, Cover–chest Accelerometer, 1996 and 6C– 1000–1, Revision C,Sternum Thoracic Weld Ass'y., 1996)
Part 572
SA 106C 041, Revision A (sheet 14) Arm Assembly, Right, 1989
Part 572
SA 106C 042, Revision A (sheet 15) Arm Assembly, Left, 1989
Part 572
SA 106C 050, Revision A (sheet 12) Lumbar Spine Assembly, 1989
Part 572
SA 106C 060, Revision A (sheet 13)Pelvis Assembly, 1989
Part 572
SA 106C 071, Revision B (sheet 16) Leg Assembly, Right, 1995
Part 572
SA 106C 072, Revision B (sheet 17) Leg Assembly, Left, 1995
Part 572
User's Manual entitled “Six–Year–Old Size Child Test Dummy SA106C,” October 28, 1991
Part 572
LP 1049/1 through 1049/54, dummy components and parts
Part 572
LP 1049/A, March 1979, assembled dummy with its major components
Part 572
LP 1049/0 parts list (5 sheets), index
Part 572
The TNO P3/4, Child Dummy Users Manual, January 1979, Instituut voor Wegtransportmiddelen TNO
Part 572
SA 1001, 1974
Part 572
FIR100 Filter Program, Version 1.0, dated July 16, 1990
572.44
Parts List and Drawings, Part 572 Subpart S Hybrid III Weighted Six–Year–Old Child Test Dummy (H–III6CW, Alpha Version), April 13, 2004, including:
  Drawing No. 167–0000, Complete Assembly
572.160, 572.161 Table A, 572.161(a)(1)
  Drawing No. 167–2000, Upper Torso Assembly
572.160(a)(1), 572.161, 572.161 Table A, 572.164, 572.165(a)
  Drawing No. 167–2020 (Revised) December 8, 2005: Spine Box Weight
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
  Drawing No. 167–3000, Lower Torso Assembly
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
  Drawing No. 167–3010 (Revision A) December 8, 2005: Lumbar Weight Base
572.160(a)(1), 572.161(a)(1), 572.161 Table A, 572.165(a)
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Weighted Hybrid III 6–year–old Child Crash Test Dummy (H–III6CW), April 2004
572.160(a)(1), 572.161(a)(3)
The Hybrid III Weighted Six–Year–Old Child Parts/Drawings List, April 13, 2004
572.160(a)(1); 572.161(a)(1)
Side Impact Moving Deformable Barrier Drawings, DSL–1279, 1280, 1281, 1284, and 1286 dated Aug. 20, 1980; DSL 1278; 1283, 1285, 1287, and 1290 dated October 1991
587.6
Drawing numbers 126–0000 through 126–0015 (sheets 1 through 3), 126–0017 through 126–0027, and a parts list “Parts List for CAMI Newborn Dummy”, Construction of the Newborn Infant Dummy, 1992
Part 572, subpart K
Dummy assembly drawing SA–SID–M001, revision C, “50th Percentile Anthropomorphic Side Impact Dummy”, dated September 12, 1996
Part 572
Dummy Assembly drawings SID–M001A revision A, SID–M001 revision B, SA–SID–M030 revision A, SA–SID–050 revision A, SA–SID–M060 revision A, SA–SID–087 sheet 1 revision H and SA–SID–087 sheet 2 revision H, all dated May 18, 1994; and the User's Manual dated May 1994
572.41
Drawing SA–SID–M001A revision A dated May 18, 1994
572.42(a); 572.43(a)
Drawing SA–SID–M001A, revision B, “Completed Assembly Side Impact Dummy”, dated September 12, 1996
Part 572
Drawing SID–SM–001, dated May 12, 1994
Part 572
Drawing SID–SM–002, dated May 12, 1994
Part 572
Drawing SID–005 revision F dated May 18, 1994
572.44(b)(1)
Drawing SID–087 revision H dated May 18, 1994
572.44(c)
Procedures for Disassembly, Inspection, Assembly and Limbs Adjustment of the Hybrid III Dummy issued April 1997, revised June 1998
572.31
Side Impact Dummy, Hybrid III, Anthropomorphic Test Dummy Parts List, dated May 10, 1997, and Users Manual, dated May 1997
Part 572, subpart M
Anthropomorphic Test Dummy Parts List, Hybrid III, dated June 26, 1998, and Parts List Index, dated June 26, 1998
572.31
Drawing SA–SIDH3–M001 “Complete Assembly SIDH3”, dated April 19, 1997
Part 572, subpart M
Drawing SIDH3–001, “Head–Neck Bracket”, dated August 30, 1996
Part 572, subpart M
Drawing SIDH3–006, “Upper and Middle Shoulder Foam”, dated May 10, 1997
Part 572, subpart M
Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002
572.130, 572.131
Parts List and Drawings, Part 272 Subpart O Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy (H–III5F, Alpha Version), June 2002, including:
  Drawing No. 880105–100X, Head Assembly
572.130, 572.131, 572.132, 572.133, 572.134, 572.135, 572.137
  Drawing No. 880105–250, Neck Assembly
572.130, 572.131, 572.133, 572.134, 572.135, 572.137
  Drawing No. 880105–300, Upper Torso Assembly
572.130, 572.131, 572.134, 572.135, 572.137
  Drawing No. 880105–450, Lower Torso Assembly
572.130, 572.131, 572.134, 572.135, 572.137
  Drawing No. 880105–560–1, Complete Leg Assembly–left
572.130, 572.131, 572.135, 572.136, 572.137
  Drawing No. 880105–560–2, Complete Leg Assembly–right
572.130, 572.131, 572.135, 572.136, 572.137
  Drawing No. 880105–728–1, Complete Arm Assembly–left
572.130, 572.131, 572.134, 572.135
  Drawing No. 880105–728–2, Complete Arm Assembly–right
572.130, 572.131, 572.134, 572.135
  Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy Parts List
572.130, 572.131
Procedures for Assembly, Disassembly, and Inspection (PADI) of the Hybrid III Fifth Percentile Small Adult Female Crash Test Dummy, Alpha Version (February 2002)
572.130, 572.132
The “Free Motion Headform Drawing Package” consisting of the following drawings:
  Drawing number 92041–001 titled “Head Form Assembly,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–002 titled, “Skull Assembly,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–003 titled, “Skull Cap Plate Assembly,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–004 titled, “Skull Cap Plate,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–005 titled, “Threaded Pin,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–006 titled, “Hex Nut,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–008 titled, “Head Skin without Nose,” dated November 30, 1992, as amended March 6, 1995
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–009 titled, “Six–Axis Load Cell Simulator Assembly,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–011 titled, “Head Ballast Weight,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 92041–018, “Head Form Bill of Materials,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
  Drawing number 78051–148, titled “Skull–Head (cast) Hybrid III,” dated May 20, 1978, as amended August 17, 1978
572.100, 572.101; 572.102; 572.103
  Drawing number 78051–228/78051–229 titled “Skin–Hybrid III,” dated May 20, 1978 as amended through September 24, 1979
572.100, 572.101; 572.102; 572.103
  Drawing number 78051–339 titled “Pivot Pin—Neck Transducer,” dated May 20, 1978, as amended May 14, 1986
572.100, 572.101; 572.102; 572.103
  Drawing number 78051–372 titled “Vinyl Skin Formulation Hybrid III,” dated May 20, 1978
572.100, 572.101; 572.102; 572.103
  Drawing number C–1797, “Neck Blank, dated August 1, 1989
572.100, 572.101; 572.102; 572.103
  Drawing number SA572–S4, titled “Accelerometer Specification,” dated November 30, 1992
572.100, 572.101; 572.102; 572.103
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841
SAE J211–1980 Instrumentation for Impact Tests
572.36(i); 572.44
SAE J211–1995 “Instrumentation for Impact Tests—Parts 1 and 2,” dated March, 1995
572.36; part 572, subpart M; 572.120
SAE J211/1, Revised March 1995: “Instrumentation for Impact Tests— Part 1: Electronic Instrumentation”
572.137; 572.146; 572.150; 572.155; 587.12; 587.15
SAE J211/2, Revised March 1995, Instrumentation for Impact Tests—Part 2: Photographic Instrumentation
572.137
SAE J449a–1963 Surface Texture Control
581.6(b)(1)
SAE J599b–1970 Lighting Inspection Code
581.5(c)
SAE J602a–1970 Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units
581.5(c)
SAE J843a–1966 Brake System Road Test Code—Passenger
575.101(e)(2)
SAE J1733 1994–12, Information Report “Sign Convention for Vehicle Crash Testing,”, December 1994
Part 572, Subpart M; 572.120; 572.137; 572.140; 572.146; 572.150; 572.155

Need assistance?