e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 46–Shipping
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

46 CFR (PARTS 41–69)
COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
46 CFR
American Boat and Yacht Council
3069 Solomon's Island Road, Edgewater, MD 21037
P–1 Safe Installation of Exhaust Systems for Propulsion and Auxiliary Machinery, 1973
58.10–5
American Bureau of Shipping
Publications Department, ABS Plaza, 16855 Northchase Drive, Houston, Texas, 77060
Rules for Building and Classing Steel Vessels, 1989
58.01; 58.05; 58.10, 58.20, 58.25
Rules for Building and Classing Steel Vessels, 1986
62.25–1; 62.25–5; 62.25–30; 62.35–35; 62.35–40; 62.35–50; 62.50–30; 62.50–30
American Gas Association (AGA)
1515 Wilson Boulevard, Arlington, Virginia 22209
AGA Z21.22–86 Relief Valves and Automatic Shutoff Devices for Hot Water Supply Systems, March 28, 1986
63.25–3
American National Standards Institute (ANSI)
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI B1.1–82 Unified Inch Screw Threads (UN and UNR Thread Form)
56.60–1; 56.25–20
ANSI B1.20.1–83 Pipe Threads, General Purpose (Inch)
56.60–1
ANSI B1.20.3–76 (reaffirmed 1982) Dryseal Pipe Threads (Inch)
56.60–1
ANSI B2.1–68 Pipe Threads
56.60–1
ANSI B16.1–75 C.I. Flanges and Fittings
56.60–1; 56.60–10; 56.60–15
ANSI B16.3–85 Maleable Iron Threaded Fittings, Classes 150 and 300
56.60–1
ANSI B16.4–85 Cast Iron Threaded Fittings, Classes 125 and 250
56.60–1
ANSI B16.5–77 Steel Pipe Flanges and Pipe Fittings
56.20–1; 56.30–10; 56.60–1; 56.60–15
ANSI B16.9–86 Factory–made Wrought Steel Buttwelding Fittings
56.60–1
ANSI B16.10–86 Face–to–face and End–to–end Dimensions of Valves
56.60–1
ANSI B16.11–80 Forged Steel Fittings, Socket–welded and Threaded
56.30–5; 56.60–1
ANSI B16.14–83 Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads
56.60–1
ANSI B16.15–85 Cast Bronze Threaded Fittings, Classes 125 and 250
56.60–1
ANSI B16.18–78 Cast Brass Solder–Joints
56.60–1
ANSI B16.20–73 Ring Joint Gaskets, Steel Flanges
56.60–1
ANSI B16.21–78 Non–metallic Gaskets for Flanges
56.60–1
ANSI B16.22–80 Wrought Copper and Bronze Solder Joint Fittings
56.60–1
ANSI B16.23–76 Cast Bronze Solder–Joint Drainage
56.60–1
ANSI B16.24–79 Brass or Bronze Flanges and Fittings
56.60–1
ANSI B16.25–86 Buttwelding Ends
56.30–5; 56.60–1; 56.70–10
ANSI B16.28–86 Wrought Steel Buttwelding Short Radius Elbows and returns
56.60–1
ANSI B16.29–86 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings–DWV
56.60–1
ANSI B16.34–88 Valves–Flanged, Threaded, and Welding End
56.20–1; 56.60–1
ANSI B16.42–87 Ductile Iron Pipe Flanges and Flanged Fittings, Clases 150 and 300
56.60–1
ANSI B18.2.1–81 Square and Hex Bolts and Screws, Inch Series
56.25–20; 56.60–1
ANSI B18.2.2–87 Square and Hex Nuts (Inch Series)
56.25–20; 56.60–1
ANSI B31.1–86 Power Piping
Part 56
ANSI B31.3–87 Chemical Plant and Petroleum Refinery Piping
58.60
ANSI B31.5–87 Refrigeration Piping
58.20
ANSI B36.10M–85 Welded and Seamless Wrought Steel Pipe
56.07–5; 56.30–20; 56.60–1
ANSI B36.19M–85 Stainless Steel Pipe
56.07–5; 56.60–1
ANSI B93.5–79 Recommended Practice for the Use of Fire Resistant Fluids for Fluid Power Systems
58.30–10
ANSI Z21.22–79 Temperature—Pressure Relief Valves
63.15–30
American Petroleum Institute (API)
1220 L Street NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
API RP 14C Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms
58.60
API RP 53, Recommended Practice for Blowout Prevention Systems for Drilling Wells
58.60
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ANSI/ASME CSD–1–1982 with Addenda CSD–1A–1984, Controls and Safety Devices for Automatically Fired Boilers, November 15, 1984
63.10–1; 63.15–1; 63.20
Boiler and Pressure Vessel Code:
  Section I, Power Boilers, July 1989 with 1989 addenda
52.01; 52.05; 52.15; 52.20; 52.25; 58.30; 59.10
  Section I, Power Boilers, 1986 edition through 1988 addenda
56.15–1; 56.15–5; 56.15–10; 56.60–1; 56.70–15; 56.95–10
  Section III, Division I, Rules for the Construction of Nuclear Power Plant Components, July 1989 with 1989 addenda
58.30
  Section IV, Heating Boilers, July 1989 with 1989 addenda
53.01; 53.05; 53.10; 53.12
  Section VII, Recommended Guidelines for the Care of Power Builders, July 1989 with 1989 addenda
59.01
  Section VIII, Division I, Pressure Vessels, 1986 edition through 1988 addenda
56.01–6; 56.15–1; 56.15–5; 56.15–10; 56.25–5; 56.30–10; 56.30–30; 56.60–1; 56.60–15; 56.95–10; 64.61
  Section VIII, Division I, Pressure Vessels, July 1989 with 1989 addenda
54.01; 54.03; 54.05; 54.10; 54.15; 54.20; 54.25; 54.30; 58.30; 59.10
  Section VIII, Division I, Pressure Vessels, 1989 edition, with addenda issued December 31, 1989
64.2; 64.5; 64.7; 64.11; 64.13; 64.21; 64.25; 64.31
  Section IX, Welding and Brazing Qualifications, 1986 edition through 1988 addenda
56.70–5; 56.70–20; 56.75–20; 56.85–10
  Section IX, Welding and Brazing Qualifications, July 1989 with 1989 addenda
57.01; 57.02; 57.03; 57.04; 57.05; 57.06; 59.10
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA, 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
ASTM A 20–80 Steel Plates for Pressure Vessels
54.25–10
ASTM A 20/A 20 M–97a, Standard Specification for General Requirements for Steel Plates for Pressure Vessels
54.01–1; 54.05–10; 54.25–10
ASTM A 36–81a Structural Steel
56.30–10
ASTM A 36/A 36 M–97a, Standard Specification for Carbon Structural Steel
56.01–2; 56.30–10
ASTM A 47–90 (1995), Standard Specification for Ferritic Malleable Iron Castings
56.01–2; 56.60–1
ASTM A 53–98, Standard Specification for Pipe, Steel, Black and Hot–Dipped, Zinc–Coated, Welded and Seamless
56.01–2; 56.10–5; 56.60–1
ASTM A 106–95, Standard Specification for Seamless Carbon Steel Pipe for High–Temperature Service
56.01–2; 56.60–1
ASTM A 126–95, Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
56.01–2; 56.60–1
ASTM A 134–80 Electric–Fusion (Arc)–Welded Steel Plate Pipe (Sizes 16 in. and over)
56.60–1
ASTM A 134–96, Standard Specification for Pipe, Steel, Electric–Fusion (Arc)–Welded (Sizes NPS 16 and Over)
56.01–2; 56.60–1
ASTM A 135–97c, Standard Specification for Electric–Resistance–Welded Steel Pipe
56.01–2; 56.60–1
ASTM A 139–96, Standard Specification for Electric–Fusion (Arc)–Welded Steel Pipe (NPS 4 and Over)
56.01–2; 56.60–1
ASTM A 178–84a Electric–Resistance Welded Carbon Steel Boiler Tubes
56.60–1
ASTM A 178/A 178 M–95, Standard Specification for Electric–Resistance–Welded Carbon Steel and Carbon–Manganese Steel Boiler and Superheater Tubes
56.01–2; 56.60–1
ASTM A 179–84 Seamless Cold–Drawn Low Carbon Steel Heat Exchanger and Condenser Tubes
56.60–1
ASTM A 179/A 179M–90a (1996), Standard Specification for Seamless Cold–Drawn Low–Carbon Steel Heat–Exchanger and Condenser Tubes
56.01–2; 56.60–1
ASTM A 182–84c Forged or Rolled Alloy–Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High–Temperature Service
56.60–105
ASTM A 182/A 182M–97c, Standard Specification for Forged or Rolled Alloy–Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High–Temperature Service
56.01–2; 56.50–105
ASTM A 192–84a Seamless Carbon Steel Boiler Tubes for High–Pressure Service
56.60–1
ASTM A 192/A 192M–91(1996), Standard Specification for Seamless Carbon Steel Boiler Tubes for High–Pressure Service
56.01–2; 56.60–1
ASTM A 193–90 Alloy–Steel and Stainless Steel Bolting Materials for High Temperature Service
58.30
ASTM A 193/A 193M–98a, Standard Specification for Alloy–Steel and Stainless Steel Bolting Materials for High–Temperature Service
58.03–1; 58.30–15
ASTM A 194–84a Carbon and Alloy Steel Nuts for Bolts for High–Pressure and High–Temperature Service
56.50–105
ASTM A 194/A 194M–98b, Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
56.01–2; 56.50–105
ASTM A 197–79 Cupola Malleable Iron
56.60–1
ASTM A 197–87 (1992), Standard Specification for Cupola Malleable Iron
56.01–2; 56.60–1
ASTM A 199–84 Seamless Cold Drawn Intermediate Alloy–Steel Heat–Exchanger and Condenser Tubes
56.60–1
ASTM A 203–80 Pressure Vessel Plates, Alloy Steel, Nickel
54.05–20
ASTM A 203/A 203 M–97, Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
54.01–1; 54.05–20
ASTM A 203–80 Pressure Vessel Plates, Alloy Steel, Nickel
54.05–20
ASTM A 210/A 210 M–96, Standard Specification for Seamless Medium–Carbon Steel Boiler and Superheater Tubes
56.01–2; 56.60–1
ASTM A 210–84a Seamless Medium Carbon Steel Boiler & Super Heater Tubes
56.60–1
ASTM A 213/A 213 M–95a, Standard Specification for Seamless Ferritic and Austenitic Alloy–Steel Boiler, Superheater, and Heat–Exchanger Tubes
56.01–2; 56.60–1
ASTM A 213–84b Seamless Ferritic and Austenitic Alloy–Steel Boiler, Superheater, and Heat–Exchanger Tubes
56.60–1
ASTM A 214/A 214 M–96, Standard Specification for Electric–Resistance–Welded Carbon Steel Heat–Exchanger and Condenser Tubes
56.01–2; 56.60–1
ASTM A 214–84a Electric–Resistance–Welded Carbon Steel Heat Exchanger and Condenser Tubes
56.60–1
ASTM A 226/A 226 M–95, Standard Specification for Electric–Resistance–Welded Carbon Steel Boiler and Superheater Tubes for High–Pressure Service
56.01–2; 56.60–1
ASTM A 226–84a Electric Resistance–Welded Carbon Steel Boiler and Superheater Tubes for High–Pressure Service
56.60–1
ASTM A 234/A 234 M–97, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
56.01–2; 56.60–1
ASTM A 234–84a Piping Fittings for Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures
56.60–1
ASTM A 249/A 249 M–96a, Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat–Exchanger, and Condenser Tubes
56.01–2; 56.60–1
ASTM A 249–84b Welded Austenitic Steel Boiler, Superheater, Heat–Exchanger, and Condenser Tubes
56.60–1
ASTM A 268/A 268 M–96, Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
56.01–2; 56.60–1
ASTM A 268–84a Seamless and Welded Ferritic Stainless Steel Tubing for General Service
56.60–1
ASTM A 276–98, Standard Specification for Stainless Steel Bars and Shapes
56.01–2; 56.60–2
ASTM A 276–83 Stainless and Heatresisting Steel Bars and Shapes
56.60–2
ASTM A 307–97, Standard Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength
56.01–2; 56.25–20
ASTM A 307–84 Carbon Steel Externally Threaded Standard Fasteners
56.25–20
ASTM A 312/A 312 M–95a, Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
56.01–2; 56.50–105; 56.60–1
ASTM A 312–84c Seamless and Welded Austenitic Stainless Steel Pipe
56.50–105; 56.60–1
ASTM A 320/A 320 M–97, Standard Specification for Alloy/Steel Bolting Materials for Low Temperature–Service
56.01–2; 56.50–105
ASTM A 320–84a Alloy–Steel Bolting Materials for Low–Temperature Service
56.50–105
ASTM A 333–84b Seamless and Welded Steel Pipe for Low–Temperature Service
56.50–105; 56.60–1
ASTM A 333/A 333 M–94, Standard Specification for Seamless and Welded Steel Pipe for Low–Temperature Service
56.01–2; 56.50–105; 56.60–1
ASTM A 334–84b Seamless and Welded Carbon and Alloy–Steel Tubes for Low–Temperature Service
56.50–105; 56.60–1
ASTM A 334/A 334 M–96, Standard Specification for Seamless and Welded Carbon and Alloy–Steel Tubes for Low–Temperature Service
56.01–2; 56.50–105; 56.60–1
ASTM A 335–85a Seamless Ferritic Alloy Steel Pipe for High–Temperature Service
56.60–1
ASTM A 335/A 335 M–95a, Standard Specification for Seamless Ferritic Alloy–Steel Pipe for High–Temperature Service
56.01–2; 56.60–1
ASTM A 350–84a Forgings, Carbon and Low–Alloy Steel, Requiring Notch Toughness Testing for Piping Components
56.50–105
ASTM A 350/A 350 M–97, Standard Specification for Carbon and Low–Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
56.01–2; 56.50–105
ASTM A 351–84/A 351M–84b Steel Castings, Austenitic, for High–Temperature Service
56.50–105
ASTM A 351/A351 M–94a, Standard Specification for Castings, Austenitic, Austenitic–Ferritic (Duplex), for Pressure–Containing Parts
56.01–2; 56.50–105
ASTM A 352/A 352M–84a Steel Castings, Ferritic and Martensitic, for Pressure Containing Parts, Suitable for Low–Temperature Service
56.50–105
ASTM A 352/A 352 M–93 (1998), Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure–Containing Parts, Suitable for Low–Temperature Service
56.01–2; 56.50–105
ASTM A 358–84b Electric–Fusion–Welded Austenitic Chromium–Nickel Alloy Steel Pipe for High–Temperature Service
56.60–1
ASTM A 358/A 358 M–95a, Standard Specification for Electric–Fusion–Welded Austenitic Chromium–Nickel Alloy Steel Pipe for High–Temperature Service
56.01–2; 56.60–1
ASTM A 369/A 369 M–92, Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High–Temperature Service
56.01–2; 56.60–1
ASTM A 369–84 Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High–Temperature Service
56.60–1
ASTM A 370–97a, Standard Test Methods and Definitions for Mechanical Testing of Steel Products
54.01–1; 54.25–20
ASTM A 370–77 Mechanical Testing of Steel Products
54.25–20
ASTM A 376–84b Seamless Austenitic Steel Pipe for High–Temperature Central–Station Service
56.07–10; 56.60–1; 56.60–2
ASTM A 376/A 376 M–96, Standard Specification for Seamless Austenitic Steel Pipe for High–Temperature Central–Station Service
56.01–2; 56.07–10; 56.60–1; 56.60–2
ASTM A 395/A 395 M–98, Standard Specification for Ferritic Ductile Iron Pressure–Retaining Castings for Use at Elevated Temperatures
56.01–2; 56.50–60; 56.60–1; 56.60–15
ASTM A 395–80 Ferritic Ductile Cast Iron Pressure–Retaining Castings for use at Elevated Temperatures
56.60–1
ASTM A 403–84a Wrought Austenitic Stainless Steel Piping Fittings
56.60–1
ASTM A 403/A 403 M–98, Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
56.01–2; 56.60–1
ASTM A 420/A 420 M–96a, Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low–Temperature Service
56.01–2; 56.50–105; 56.60–1
ASTM A 420–84 Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low–Temperature Service
56.50–105; 56.60–1
ASTM A 430–84a Austenitic Steel, Forged and Bored Pipe for High–Temperature Service
56.60–1
ASTM A 520–97, Standard Specification for Supplementary Requirements for Seamless and Electric–Resistance–Welded Carbon Steel Tubular Products for High–Temperature Service Conforming to ISO Recommendations for Boiler Construction
56.01–2; 56.60–1
ASTM A 520–72 (R 79) Supplementary Requirements Seamless and Electrical–Resistance–Welded Carbon Steel Tubular Products for High Temperature Service Conforming to ISO Recommendations for Boiler Construction
56.60–1
ASTM A 522–81 Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low–Temperature Service
56.50–15
ASTM A 522/A 522 M–95b, Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low–Temperature Service
56.01–2; 56.50–105
ASTM A 536–84 (1993), Standard Specification for Ductile Iron Castings
56.01–2; 56.60–1
ASTM A 575–81 Steel Bars, Carbon, Merchant Quality, M–Grades
56.60–2
ASTM A 575–96, Standard Specification for Steel Bars, Carbon, Merchant Quality, M–Grades
56.01–2; 56.60–2
ASTM A 576–81 Steel Bars, Carbon, Hot–Wrought, Special Quality
56.60–2
ASTM A 576–90b (1995), Standard Specification for Steel Bars, Carbon, Hot–Wrought, Special Quality
56.01–2; 56.60–2
ASTM B 16–85 Free–cutting Brass Rod, and Shapes for use in Shapes for use in Screw Machines
56.60–2
ASTM B 16–92, Standard Specification for Free–Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines
56.01–2; 56.60–2
ASTM B 21–83b Naval Brass Rod, Bar and Shapes
56.60–2
ASTM B 21–96, Standard Specification for Naval Brass Rod, Bar, and Shapes
56.01–2; 56.60–2
ASTM B 26–84 Aluminum–Alloy sand Castings
56.60–2
ASTM B 26/B 26M–97, Standard Specification for Aluminum–Alloy Sand Castings
56.01–2; 56.60–2
ASTM B 42–84a Seamless Copper Pipe, Standard Sizes
56.60–1
ASTM B 42–96, Standard Specification for Seamless Copper Pipe, Standard Sizes
56.01–2; 56.60–1
ASTM B 43–84a Seamless Red Brass Pipe, Standard Sizes
56.60–1
ASTM B 43–96, Standard Specification for Seamless Red Brass Pipe, Standard Sizes
56.01–2; 56.60–1
ASTM B 68–83 Seamless Copper Tube, Bright Annealed
56.60–1
ASTM B 68–95, Standard Specification for Seamless Copper Tube, Bright Annealed
56.01–2; 56.60–1
ASTM B 75–84 Seamless Copper Tube
56.60–1
ASTM B 75–97, Standard Specification for Seamless Copper Tube
56.01–2; 56.60–1
ASTM B 85–84 Aluminum–Alloy Die Castings
56.60–2
ASTM B 85–96, Standard Specification for Aluminum–Alloy Die Castings
56.01–2; 56.60–2
ASTM B 88–83a Seamless Copper Water Tube
56.60–1
ASTM B 88–96, Standard Specification for Seamless Copper Water Tube
56.01–2; 56.60–1
ASTM B 96–84a Copper–Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
56.60–2
ASTM B 96–93, Standard Specification for Copper–Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
56.01–2; 56.60–2; 58.03–1; 58.50–5
ASTM B 97–80 Copper Silicon Alloy Plate, Sheet, Strip and Rolled Bar for General Purposes
58.50–5
ASTM B 111–85 Copper and Copper–Alloy Seamless Condenser Tubes and Ferrule Stock
56.60–1
ASTM B 111–95, Standard Specification for Copper and Copper–Alloy Seamless Condenser Tubes and Ferrule Stock
56.01–2; 56.60–1
ASTM B 122–85 Copper–Nickel–Tin Alloy, Copper–Nickel–Zinc Alloy (Nickel Silver) & Copper–Nickel Alloy Plate, Sheet, Strip and Rolled Bar
58.50
ASTM B 122/B 122 M–95, Standard Specification for Copper–Nickel–Tin Alloy, Copper–Nickel–Zinc Alloy (Nickel Silver), and Copper–Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
58.03–1; 58.50–5
ASTM B 124–84 Copper and Copper–Alloy Forging Rod, Bar and Shapes
56.60–2
ASTM B 124–96, Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
56.01–2; 56.60–2
ASTM B 127–80a Nickel Copper Alloy (UNS NO 4400) Plate, Sheet and Strip
58.50–5; 58.50–10
ASTM B 152–84 Copper Sheet, Strip, Plate and Rolled Bar
58.50
ASTM B 152–97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
58.03–1; 58.50–5
ASTM B 154–82 Mercurous Nitrate Test for Copper and Copper Alloys
56.60–2
ASTM B 161–81 Nickel Seamless Pipe and Tube
56.60–1
ASTM B 161–93, Standard Specification for Nickel Seamless Pipe and Tube
56.01–2; 56.60–1
ASTM B 165–81 Nickel–Copper Alloy (UNS N04400) Seamless Pipe and Tube
56.60–1
ASTM B 165–93, Standard Specification of Nickel–Copper Alloy (UNS NO4400) Seamless Pipe and Tube
56.01–2; 56.60–1
ASTM B 167–80 Nickel–Chromium–Iron Alloy (UNS NO 6600) Seamless Pipe and Tube
56.60–1
ASTM B 167–97a, Standard Specification for Nickel–Chromium–Iron Alloys (UNS NO6600, NO6601, NO6603, NO6690, NO6025, and NO6045) Seamless Pipe and Tube
56.01–2; 56.60–1
ASTM B 171–85a Copper–Alloy Condenser Tube Plates
56.60–2
ASTM B 171–95, Standard Specification for Copper–Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
56.01–2; 56.60–2
ASTM B 209–81 Aluminum–Alloy Sheet and Plate
58.50–5; 58.50–10
ASTM B 209–96, Standard Specification for Aluminum and Aluminum–Alloy Sheet and Plate
58.03–1; 58.50–5; 58.50–10
ASTM B 210–82a Aluminum–Alloy Drawn Seamless Tubes
56.60–1
ASTM B 210–95, Standard Specification for Aluminum and Aluminum–Alloy Drawn Seamless Tubes
56.01–2; 56.60–1
ASTM B 234–85 Aluminum–Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
56.60–1
ASTM B 234–95, Standard Specification for Aluminum and Aluminum–Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
56.01–2; 56.60–1
ASTM B 241–83a Aluminum–Alloy Seamless Pipe and Seamless Extruded Tube
56.60–1
ASTM B 241/B 241 M–96, Standard Specification for Aluminum and Aluminum–Alloy Seamless Pipe and Seamless Extruded Tube
56.01–2; 56.60–1
ASTM B 280–83 Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
56.60–1
ASTM B 280–97, Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
56.01–2; 56.60–1
ASTM B 283–84 Copper and Copper–Alloy Die Forging (Hot–pressed)
56.60–2
ASTM B 283–96, Standard Specification for Copper and Copper–Alloy Die Forgings (Hot–Pressed)
56.01–2; 56.60–2
ASTM B 315–85 Seamless Copper Alloy Pipe and Tube
56.60–1
ASTM B 315–93, Standard Specification for Seamless Copper Alloy Pipe and Tube
56.01–2; 56.60–1
ASTM B 361–81 Factory Made Wrought Aluminum and Aluminum Alloy Welding Fittings
56.60–1
ASTM B 361–95, Standard Specification for Factory–Made Wrought Aluminum and Aluminum–Alloy Welding Fittings
56.01–2; 56.60–1
ASTM B 858M–95 Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test
56.01–2; 56.60–2(a)
ASTM D 92–78 Test for Flash and Fire Points by Cleveland Open Cup
58.30–10
ASTM D 92–97, Standard Test Method for Flash and Fire Points by Cleveland Open Cup
58.03–1; 58.30–10
ASTM D 93–80 Test for Flash Point by Pensky–Martens Closed Tester
58.01–10; 58.01–15
ASTM D 93–97, Standard Test Methods for Flash Point by Pensky–Martens Closed Cup Tester
58.01–10; 58.03–1
ASTM D 323–79 Test for Vapor Pressure of Petroleum Products (Reid Method)
58.16–5
ASTM D 323–94, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
58.03–1; 58.16–5
ASTM D 396–80 Fuel Oils
63.05–75; 65.10–75
ASTM D 635–81 Test Rate of Burning and/or Extent and Time of Burning of Self–Supporting Plastics in a Horizontal Position
56.60–25
ASTM D 635–97, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
56.01–2; 56.60–25
ASTM D 665–92 Standard Test Method for Rust–Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
61.03–1; 61.20–17
ASTM D 665–98, Standard Test Method for Rust–Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
61.03–1; 61.20–17
ASTM D 1785–83 Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
56.60–25
ASTM D 1785–96b, Standard Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80, and 120
56.01–2; 56.60–25
ASTM D 2241–96b, Standard Specification for Poly (Vinyl Chloride)(PVC) Pressure–Rated Pipe (SDR Series)
56.01–2; 56.60–25
ASTM D 2464–96a, Standard Specification for Threaded Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings Schedule 80
56.01–2; 56.60–25
ASTM D 2466–97, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
56.01–2; 56.60–25
ASTM D 2467–96a, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
56.01–2; 56.60–25
ASTM D 2665–97b, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
56.01–2; 56.60–25
ASTM D 2863–95, Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle–like Combustion of Plastics (Oxygen Index)
56.01–2; 56.60–25
ASTM E 23–80 Notched Bar Impact Testing of Metallic Materials
54.05–5
ASTM E 23–82 Notched Bar Impact Testing of Metallic Materials
56.50–105
ASTM E 23–96, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
54.01–1; 54.05–5; 56.01–2; 56.50–105
ASTM E 208–69 (R 75) Conducting Drop–Weight Test to Determine Nil–Ductility Transition Temperature of Ferritic Steels
54.05–5
ASTM E 208–95a, Standard Test Method for Conducting Drop–Weight Test to Determine Nil–Ductility Transition Temperature of Ferritic Steels
54.01–1; 54.05–5
ASTM F 682–82a Wrought Carbon Steel Sleeve–Type Pipe Couplings
56.60–1
ASTM F 682–82a (1993), Standard Specification for Wrought Carbon Steel Sleeve–Type Pipe Couplings
56.01–2; 56.60–1
ASTM F 1006–86 Entrainment Separators for Use in Marine Piping Applications
56.60–1
ASTM F 1006–86 (1992), Standard Specification for Entrainment Separators for Use in Marine Piping Applications
56.01–2; 56.60–1
ASTM F 1007–86 Pipe–Line Expansion Joints of the Packed Slip Type or Marine Application
56.60–1
ASTM F 1007–86 (1996), Standard Specification for Pipe–Line Expansion Joints of the Packed Slip Type for Marine Application
56.01–2; 56.60–1
ASTM F 1020–86 Line–Blind Valves for Marine Applications
56.60–1
ASTM F 1020–86 (1996), Standard Specification for Line–Blind Valves for Marine Applications
56.01–2; 56.60–1
ASTM F 1120–87 Circular Metallic Bellows Type Expansion Joints for Use in Marine Piping Applications
56.60–1
ASTM F 1120–87 (1993), Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
56.01–2; 56.60–1
ASTM F 1121–87, International Shore Connections for Marine Fire Applications
56.60–1
ASTM F 1123–87 Non–Metallic Expansion Joints
56.60–1
ASTM F 1123–87 (1993), Standard Specification for Non–Metallic Expansion Joints
56.01–2; 56.60–1
ASTM F 1139–88 Steam Traps and Drains
56.60–1
ASTM F 1139–88 (1993), Standard Specification for Steam Traps and Drains
56.01–2; 56.60–2
ASTM F 1172–88 (1993), Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
56.01–2; 56.60–1
ASTM F 1172–88 Fuel Oil Meters of the Volumetric Positive Displacement Type
56.60–1
ASTM F 1173–88 Epoxy Resin Fiberglass Pipe and Fittings to be Used for Marine Applications
56.60–1; 56.60–25
ASTM F 1173–95, Standard Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications
56.01–2; 56.60–1
ASTM F 1199–88 Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150 °F Maximum)
56.60–1
ASTM F 1199–88 (1993), Standard Specification for Cast (All Temperature and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
56.01–2; 56.60–1
ASTM F 1200–88 Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150° F)
56.60–1
ASTM F 1200–88 (1993), Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150° F)
56.01–2; 56.60–1
ASTM F 1201–88 (1993), Standard Specification for Fluid Conditioner Fittings in Piping Applications above 0° F
56.01–2; 56.60–1
ASTM F 1201–88 Fluid Conditioner Fittings in Piping Applications Above 0° F
56.60–1
ASTM F 1323–98, Standard Specification for Shipboard Incinerators
63.05–1; 63.25–9
ASTM F 1387–93 Standard Specification for Performance of Mechanically Attached Fittings, incl. Supplementary Requirements and Annex
56.01–2; 56.30–25
ASTM F 1476–95a, Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
56.01–2; 56.30–35
ASTM F 1548–94 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings, Used in Piping Applications
56.01–2; 56.30–35
Compressed Gas Association
1725 Jefferson Davis Highway, Suite 1004, Arlington, VA 22202
S–1.2 Safety Relief Device Standards—Cargo and Portable Tanks for Compressed Gases, 1979
54.15–25
S–1.2.5.2 Flow Test of Safety Relief Valves, 1979
54.15–10
Expansion Joint Manufacturers Association, Inc.
25 North Broadway, Tarrytown, NY 10591
Standards of the Expansion Joint Manufacturers Association, 1980 edition with 1985 addenda
56.60–1
Fluid Controls Institute, Inc.
Plaza 222, U.S. Highway One, Tequesta, FL 33458
69–1 Pressure Rating Standard for Steam Traps, 1977
56.60–1
International Maritime Organization (formerly Inter–Governmental Maritime Organization)
4 Albert Embankment, London SE1 7SR, England Telephone: 0171–587 3210; FAX: 0171–587 3210; Telex: 23588. Purchase from: IMO Sales, New York Nautical Instrument and Service Corp., 140 W. Broadway, New York, NY 10013. Telephone: (212) 962–4522; FAX: (212) 406–8420
A.467(XII), Guidelines for Acceptance of Non–Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981
58.25–60
A.468(XII), Code on Noise Levels on Board Ships, 1981
58.01–50
Resolution A.753 (XVIII) Guidelines for the Application of Plastic Pipes on Ships, November 4, 1993
56.01–2; 56.60–25
Resolution MEPC.59 (33) Revised Guidelines for the Implementation of Annex V of MARPOL 73/78, October 30, 1992
63.05–1; 63.25–9
International Organization for Standardization
Case Postale 56, CH–1211, Geneve 20, Switzerland
13617 Shipbuilding–Shipboard Incinerators–Requirements (First Edition, 1995)
63.05–1; 63.25–9
Manufacturers Standardization Society
127 Park Street NE., Vienna, VA 22180
SP–6–85 Standard Finishes for Contact Faces of Pipe Flanges and Connecting–End Flanges of Valves and Fittings
56.25–10; 56.60–1
SP–9–87 Spot–facing for Bronze, Iron and Steel Flanges
56.60–1
SP–25 Standard Marking System for Valves, Fittings, Flanges and Unions, 1978
54.01–25
SP–25–88 Standard Marking System for Valves, Fittings, Flanges and Unions
56.15–1; 56.20–5; 56.60–1
SP–42 Class 150—Corrosion Resistant Gate Globe, Angle and check valves with Flanged and Butt–Welded Ends, 1978
56.60–1
SP–44–85 Steel Pipe Line Flanges
56.60–1
SP–45–87 By–pass and Drain Connection Standard
56.20–20; 56.60–1
SP–51–86 Class 150LW Corrosion Resistant Cast Flanges and Fittings, 1978
56.60–1
SP–55–85 Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and other Piping Components—Magnetic Particle Examination Method
56.60–1
SP–58–83 Pipe Hangers and Supports—Materials, Design and Manufacture
56.60–1
SP–61–85 Pressure Testing of Steel Valves
56.60–1
SP–67–83 Butterfly Valves
56.60–1
SP–69–83 Pipe Hangers and Supports—Selection and Application
56.60–1
SP–72–87 Ball Valves with Flanged or Butt–Welding Ends for General Service
56.60–1
SP–73–86 Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings
56.60–1
SP–83–87 Steel Pipe Unions, Socket–Welding and Threaded
56.60–1
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 17111–5098
Military Specifications:
  MIL–S–901 Shock Tests, HI, (high impact); shipboard machinery equipment and systems requirements for, 1963
58.30–17
National Fire Protection Association
11 Tracy Drive, Avon, MA 02322 Telephone: (800) 344–3555
70 National Electrical Code, 1981
63.05–85; 63.10–85
302–89 Fire Protection Standard for Motor Craft, Pleasure and Commercial
58.10
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001, Telephone: (412) 776–4841
J343–80 Tests and Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
56.60–25
J429 Mechanical and Quality Requirements for Externally Threaded Fasteners, 1980k
58.30–15
J1928–89, Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications
58.10
J1942–89, Hose and Hose Assemblies for Marine Applications
56.60
J1475–84 Hydraulic Hose Fittings for Marine Applications
56.60–25
Tubular Exchanger Manufacturers Association
707 Westchester Ave., White Plains, NY 10604
Heat Exchangers, Class “B,” “C,” or “R”, 1978
54.01–3
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
UL 174 Standard for Household Electric Storage Tank Water Heaters, Seventh Edition, April 18, 1983 (Revisions through March 1988)
63.25–3
UL 296 Standard for Oil Burners, Seventh Edition, August 22, 1980 (Revisions through August 1985)
63.15–5
UL 343 Standard for Pumps for Oil–Burning Appliances, Sixth Edition, July 14, 1986
63.15–3
UL 506–79 Specialty Transformers
63.05–55; 63.10–65
UL 814–78 Gas Tube Sign and Ignition Cable
63.05–55; 63.10–55
UL 1102–80 Non–Integral Marine Fuel, Tanks
58.50–15
UL 1111–88 Marine Carburetor Flame Arresters
58.10
UL 1453, Standard for Electric Booster and Commercial Storage Tank Water Heaters, Third Edition, February 5, 1988
63.25–3
U.S. Department of Commerce
National Technical Information Service, 5285 Port Royal Rd., Springfield, VA 22181, Telephone: (703) 487–4650, FAX: (703) 487–4142
Federal Information Processing Standards Publication 55DC, Guideline: Codes For Named Populated Places, Primary County Divisions, And Other Locational Entities of the United States and Outlying Areas (1987)
67.13; 67.119

Need assistance?