e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 40—Protection of Environment
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

40 CFR (PARTS 790 TO END): TOXIC SUBSTANCES CONTROL ACT
ENVIRONMENTAL PROTECTION AGENCY
40 CFR
American Chemical Society
Copies available from: EPA TSCA Document Processing Center, Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
Environmental Science and Technology, Vol. 14, No. 11, Prediction of the Volatilization Rates of High-Volatility Chemicals from Natural Water Bodies, Smith, et al.
799.1285(e)(2)(i)
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959
ASTM D 86–04b, Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
1065.703; 1065.710; 1065.1010
ASTM D 93–02a, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
1065.703; 1065.1010
ASTM D 287–92 (Reapproved 2000), Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
1065.703; 1065.1010
ASTM D 323–99a, Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
1065.710; 1065.1010
ASTM D 445–04, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
1065.703; 1065.1010
ASTM D 471–98, Standard Test Method for Rubber Property—Effect of Liquids, 1998
1051.501; 1051.810
ASTM D 613–03b, Standard Test Method for Cetane Number of Diesel Fuel Oil
1065.703; 1065.1010
ASTM D 814–95 (Reapproved 2000), Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids, 2000
1051.810
ASTM D 910–04a, Standard Specification for Aviation Gasolines
1065.701; 1065.1010
ASTM D 975–04c, Standard Specification for Diesel Fuel Oils
1065.701; 1065.1010
ASTM D 976–91 (Reapproved 2000), Standard Test Methods for Calculated Cetane Index of Distillate Fuels
1065.205; 1065.1010
ASTM D 1193–77 (Reapproved 1983) Standard Specification for Reagent Water
796.3500(b)(1)(ii)
ASTM D 1266–98 (Reapproved 2003), Standard Test Method for Sulfur in Petroleum Products (Lamp Method), 1998
1065.710; 1065.1010
ASTM D 1267–02, Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method), 2002
1065.720; 1065.1010
ASTM D 1319–03, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, 2002
1065.710; 1065.1010
ASTM D 1655–04a, Standard Specification for Aviation Turbine Fuels
1065.701; 1065.1010
ASTM D 1836–83 Standard Specification for Commercial Hexanes
795.232(c)(2)(i); 799.2155(a)(1)
ASTM D 1837-02a, Standard Test Method for Volatility of Liquefied Petroleum (LP)Gases, 2002
1065.720; 1065.1010
ASTM D 1838–03, Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases, 2001
1065.720; 1065.1010
ASTM D 1945–03, Standard Test Method for Analysis of Natural Gas by Gas Chromatography
1065.715; 1065.1010
ASTM D 2158–04, Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
1065.720; 1065.1010
ASTM D 2163–91 (Reapproved 1996), Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography, 1996
1065.720; 1065.1010
ASTM D 2598–02, Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis, 2002
1065.720; 1065.1010
ASTM D 2622–03, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
1065.703; 1065.1010
ASTM D 2713–91 (Reapproved 2001), Standard Test Method for Dryness of Propane (Valve Freeze Method), 2001
1065.720; 1065.1010
ASTM D 2784–98, Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp), 1998
1065.720; 1065.1010
ASTM D 2879–86 Standard Test Method for Vapor Pressure—Temperature Relationship and Initial Decomposition Temperature of Liquids by Isotoniscope
796.1950(b)(2)(i)
ASTM D 2880–03 Standard Specification for Gas Turbine Fuel Oils
1065.720; 1065.1010
ASTM D 2986–95a (Reapproved 1999), Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test
1065.170; 1065.1010
ASTM D 3231–02, Standard Test Method for Phosphorous in Gasoline, 2002
1065.710; 1065.1010
ASTM D 3237–02, Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
1065.710; 1065.1010
ASTM D 4814–04b, Standard Specification for Automotive Spark-Ignition Engine Fuel
1065.701; 1065.1010
ASTM D 5186–03, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography
1065.703; 1065.1010
ASTM D 5797–96 (Reapproved 2001), Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
1065.701; 1065.1010
ASTM D 5798–99 (Reapproved 2004), Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
1065.701; 1065.1010
ASTM D 6615–04a, Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
1065.701; 1065.1010
ASTM D 6751–03a, Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
1065.701; 1065.1010
ASTM D 6985–04a, Standard Specification for Middle Distillate Fuel Oil—Military Marine Applications
1065.701; 1065.1010
ASTM E 29–02, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications, 2002
1048.801; 1048.810; 1051.801; 1051.810
ASTM E 324–99, Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
799.5085
ASTM E 729–96 (Reapproved 2002), Standard Guide for Conducting Acute Toxicity Tests on Test Materials with Fishes, Macroinvertebrates, and Amphibians
799.5085
ASTM E 1147–92 (Reapproved 1997), Standard Test Method for Partition Coefficient (N-Octanol/Water) Estimation by Liquid Chromatography
799.5085
ASTM E 1148–02, Standard Test Method for Measurements of Aqueous Solubility
799.5085
ASTM E 1163–98 (Reapproved 2002), Standard Test Method for Estimating Acute Oral Toxicity in Rats
799.5085
ASTM E 1193–97 (Reapproved 2004), Standard Guide for Conducting Daphnia Magna Life-Cycle Toxicity Tests
799.5085
ASTM E 1218–04, Standard Guide for Conducting Static Toxicity Tests with Microalgae
799.5085
ASTM E 1625–94 (Reapproved 2001), Standard Test Method for Determining Biodegradability of Organic Chemicals in Semi-Continuous Activated Sludge (SCAS)
799.5085
ASTM E 1719–97, Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
799.5085
ASTM E 1782–03, Standard Test Method for Determining Vapor Pressure by Thermal Analysis
799.5085
ASTM F 1471–93 (Reapproved 2001), Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air Filter System
1065.1001; 1065.1010
California Air Resources Board
9528 Telstar Avenue, El Monte, California 91731
California Non-Methane Organic Gas Test Procedures, July 30, 2002
1065.805; 1065.1010
EPA TSCA Document Processing Center
Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
ASTM STP 854, “Aquatic Safety Assessment of Chemicals Sorbed to Sediments”, by W.J. Adams et al, as published in Aquatic Toxicology and Hazard Assessment: Seventh Symposium.
799.500(c)(4)(i)(B); 799.4000(d)(3)(i); 799.4360(d)(7)(i)(B)
ASTM STP 854, “Phoxoccephalid Amphipod Bioassay for Marine Sediment Toxicity”, by R.C. Swartz, et al, as published in Aquatic Toxicology and Hazard Assessment: Seventh Symposium.
799.500(c)(4)(i)(A)
International Organization for Standardization
Case Postale 56, CH–1211 Geneve 20, Switzerland
ISO 8178-1, Reciprocating Internal Combustion Engines—Exhaust Emission Measurement—Part 1: Test-bed Measurement of Gaseous and Particulate Exhaust Emissions, August 15, 1996
1065.130; 1065.135; 1065.140; 1065.155; 1065.1010
ISO 9141–2: Road Vehicles—Diagnostic Systems—Part 2: CARB Requirements for Interchange of Digital Information, February 1, 1994
1048.110; 1048.810; 1806-04; 1806-05
ISO 9888: Water Quality—Evaluation of Ultimate Aerobic Biodegradability of Organic Compounds in Aqueous Medium—Static Test (Zahn-Wellens Method), Second edition, 1999
799.5085
ISO 14230–4: Road Vehicles—Diagnostic Systems—Keyword Protocol 2000—Part 4: Requirements for Emission-related Systems, June 1, 2000
1048.110; 1048.810; 1806-04; 1806-05
ISO 14644–1: Clean Rooms and Associated Controlled Environments, 2001
1065.190; 1065.1010
National Institute of Standards and Technology
Government Printing Office, Washington, DC, or download from the Internet at: http://physics.nist.gov/Pubs/SP811
NIST Special Publication 811: Guide for the Use of the International System of Units (SI), 1995
1039.801; 1039.810; 1065.20; 1065.1001; 1065.1005; 1065.1010
NIST Technical Note 1297: Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
1065.1001; 1065.1010
Organization for Economic Co-operation and Development
OECD Publication and Information Center, Room Number 1207, 1750 Pennsylvania Avenue, NW. Washington, DC
“Teratogenicity”, Number 414, adopted May 12, 1981
799.1650(c)
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001; Telephone: (412) 776–4841
SAE Paper No. 770141, Optimization of Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, 2001
1065.360; 1065.1010
SAE 2001-01-3536, Relationships Between Instantaneous and Measured Emissions in Heavy Duty Applications, 2001
1065.309; 1065.1010
SAE J30, Fuel and Oil Hoses, June 1998
1051.245; 1051.501; 1051.810
SAE J1930: Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms, May 1998
1039.135; 1039.810; 1048.135; 1048.810; 1051.135; 1051.810; 1808-01; 1808-07
SAE J2260: Nonmetallic Fuel System Tubing with One or More Layers, November 1996
1048.105; 1048.810; 1051.245; 1051.810
Society for Industrial Microbiology
POB 12538, Arlington, VA 22209–8534
Developments in Industrial Microbiology, Vol. 18, Chapter 11, 1977; An Artificial Microbiol Ecosystem for Determining Effects and Rate of Toxicants in a Salt-March Environment, A.W. Bouquin et al., copies available from: EPA TSCA Document Processing Center, Rm. G–004 Northeast Mall, 401 M Street, SW., Washington, DC 20460
799.4000(c)(1)(i); 799.1285 (e)(1)(i); 799.500 (d)(2)(i)(B)

Need assistance?