e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 40—Protection of Environment
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

40 CFR (PARTS 260 TO 265): SOLID WASTES
ENVIRONMENTAL PROTECTION AGENCY
40 CFR
American Petroleum Institute (API)
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
API Publication 2517, Third Edition, February 1989, Evaporative Loss From External Floating-Roof Tanks
260.11; 265.1084
American Society for Testing Materials
100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959
ASTM D 93–79 or ASTM D 93–80: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
260.11; 261.21
ASTM D 1946–82 Standard Method for Analysis of Reformed Gas by Gas Chromatography
260.11; 264.1033; and 265.1033
ASTM D 2267–88 Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography
260.11; 264.1063
ASTM D 2382–83 Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)
260.11; 264.1033; and 265.1033
ASTM D 2879–92, Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
260.11; 265.1084
ASTM D 3278–78 Standard Test Methods for Flash Point for Liquids by Setaflash Closed Tester
261.21
ASTM E 168–88 Standard Practices for General Techniques of Infrared Quantitative Analysis
264.1063
ASTM E 169–87 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
264.1063
ASTM E 260–85 Standard Practice for Packed Column Gas Chromatography
264.1063
ASTM E 926–88 Standard Test Methods for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals, Test Method C—Bomb, Acid Digestion Method
260.11
Environmental Protection Agency
Research Triangle Park, North Carolina
“Screening Procedures for Estimating the Air Quality Impact of Stationary Sources, Revised“ October 1992, EPA Publication No. EPA–450/R–92–019.
260.11
Environmental Protection Agency
Office of Solid Waste and Emergency Response, Waste Characterization Branch, Washington, DC 20460
Air Pollution Training Institute Course 415: Control of Gaseous Emissions, EPA Publication 450/2–81–005, December 1981
260.11(a); 264.1035(b)(4)(iii); 265.1035(b)(4)(iii)
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
Flammable and Combustible Liquids Code, 1977 or 1981
264.198; 265.198
National Technical Information Service
5285 Port Royal Road, Springfield, VA 22161; Also available for the Superintendent of Documents, U.S. Government Printing Office, Washington DC, 20402
APTI Course 415: “Control of Gaseous Emissions,” EPA Publication EPA-450/2-81-005, December 1981
264.1035; 265.1035
Method 1664: “N-Hexane Extractable Material (HEM; Oil and Grease) and Silica Gel–Treated N-Hexane Extractable Material (SGT-HEM; Non-polar Material) by Extraction and Gravimetry,“ PB99-121949, Revision A
Part 261, Appendix IX
Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, EPA Publication SW–846 Third Edition. A suffix of “A” in the method number indicates revision one (the method has been revised once); a suffix of “B” in the method number indicates revision two (the method has been revised twice); a suffix of “C” in the method number indicates revision three (the method has been revised three times); a suffix of “D” in the method number indicates revision four (the method has been revised four times).
Method 0010: “Modified Method 5 Sampling Train,” including Appendix A (“Preparation of XAD-2 Sorbent Resin,”) and B (“Total Chromatographable Organic Material Analysis”) September 1986
260.11; 261, Appendix IX
Method 0011: “Sampling for Selected Aldehyde and Ketone Emissions from Stationary Sources,” December 1996
260.11; 261, Appendix IX
Method 0020: “Source Assessment Sampling System (SASS),” September 1986
260.11; 261, Appendix IX
Method 0023A: “Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofuran Emissions from Stationary Sources,” December 1996
260.11; 261, Appendix IX
Method 0030: “Volatile Organic Sampling Train,” September 1986
260.11; 261, Appendix IX
Method 0031: “Sampling Method for Volatile Organic Compounds (SMVOC),” December 1996
260.11; 261, Appendix IX
Method 0040: “Sampling of Principal Organic Hazardous Constituents from Combustion Sources Using Tedlar Bags,” December 1996
260.11; 261, Appendix IX
Method 0050: “Isokinetic HCI/CI2 Emission Sampling Train,” December 1996
260.11; 261, Appendix IX
Method 0051: “Midget Impinger HCI/CI2 Emission Sampling Train,” December 1996
260.11; 261, Appendix IX
Method 0060: “Determination of Metals in Stack Emissions,” December 1996
260.11; 261, Appendix IX
Method 0061: “Determination of Hexavalent Chromium Emissions from Stationary Sources,” December 1996
260.11; 261, Appendix IX
Method 1010A: “Test Methods for Flash Point by Pensky-Martens Closed Cup Tester,” November 2004
260.11; 261, Appendix IX
Method 1020B: “Standard Test Methods for Flash Point by SetaFlash (Small Scale) Closed-Cup Apparatus,” November 2004
260.11; 261, Appendix IX
Method 1110A: “Corrosivity Toward Steel,” November 2004
260.11; 261, Appendix IX; 261.22
Method 1310B: “Extraction Procedure (EP) Toxicity Test Method and Structural Integrity Test,” November 2004
260.11; 261, Appendix IX
Method 1311: “Toxicity Characteristic Leaching Procedure,” July 1992
260.11; 261, Appendix IX
Method 1312: “Synthetic Precipitation Leaching Procedure,” September 1994
260.11; 261, Appendix IX
Method 1320: “Multiple Extraction Procedure,” September 1986
260.11; 261, Appendix IX
Method 1330A: “Extraction Procedure for Oily Wastes,” July 1992
260.11; 261, Appendix IX
Method 9010C: “Total and Amenable Cyanide: Distillation,” November 2004
260.11; 261 Appendix IX
Method 9012B: “Total and Amenable Cyanide Automated Colorimetric with Off-line Distillation,” November 2004
260.11; 261 Appendix IX
Method 9040C: “pH Electrometric Measurement,” November 2004
260.11; 261 Appendix IX; 261.22
Method 9045D: “Soil and Waste pH,” November 2004
260.11; 261 Appendix IX
Method 9060A: “Total Organic Carbon,” November 2004
260.11; 261 Appendix IX; 264.1034; 264.1063; 265.1034; 265.1063
Method 9070A: “n-Hexane Extractable Material (HEM) for Aqueous Samples,” November 2004
260.11; 261 Appendix IX
Method 9071B: “n-Hexane Extractable Material (HEM) for Sludge, Sediment, and Solid Samples,” April 1998
260.11; 261, Appendix IX
Method 9095B: “Paint Filter Liquids Test,” November 2004
260.11; 261 Appendix IX; 264.190; 264.314; 265.190; 265.314; 265.1081
Organization for Economic Cooperation and Development
Environment Directorate 2 rue Andre Pascal 75775 Paris Cedex 16, France
OECD Green List of Wastes (revised May 1994), Amber List of Wastes and Red List of Wastes (both revised May 1993) as set forth in Appendix 3, Appendix 4 and Appendix 5, respectively, to the OECD Council Decision C(92)39/FINAL (Concerning the Control of Transfrontier Movements of Wastes Destined for Recovery Operations)
262.89

Need assistance?