eCFR — Code of Federal Regulations

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html

40 CFR (63.1440 TO 6175) ENVIRONMENTAL PROTECTION AGENCY	40 CFR
American Conference of Governmental Industrial Hygienists, Customer Service Department 1330 Kemper Meadow Drive, Cincinnati, Ohio 45240–1634
Industrial Ventilation: A Manual of Recommended Practice	63.1502
Industrial Ventilation: A Manual of Recommended Practice, 23rd Edition, 1998, Chapters 3 and Chapter 5	63.1506(c); 63.2984(e); 63.3003
American Petroleum Institute 1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
API Publication 2517, Evaporative Loss from External Floating-Roof Tanks, 3rd Ed., February 1989	63.2406
American Society of Mechanical Engineers 3 Park Avenue, New York, NY 10016–5990; Order inquiries: ASME International, Orders/Inquiries, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763 Also available from Global Engineering Documents, Sales Department, 15 Inverness Way East, Englewood, CO 80112
ANSI/ASME PTC 19.10–1981, Flue and Exhaust Gas Analyses, Part 10: Instruments and Apparatus	63.3166(a)(3); 63.3360(e)(1)(iii); 63.3545(a)(3); 63.3555(a)(3); 63.4166(a)(3); 63.4362(a)(3); 63.4766(a)(3); 63.4965(a)(3); 63.5160(d)(1)(iii)
American Society for Testing and Materials 100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
ASTM D 1475–98 (Reapproved 2003), Standard Test Method for Density of Liquid Coatings, Inks, and Related Products	63.3941(b)(4), 63.3941(c), 63.3951(c), 63.4141(b)(3), 63.4141(c), 63.4551(c), 63.3151(b)
ASTM D 2099-00, Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester	63.5350
ASTM D 2697–86 (Reapproved 1998), Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings	63.3161(f)(1), 63.3521(b)(1), 63.3941(b)(1), 63.4141(b)(1); 63.4741(b)(1); 63.4941(b)(1); 63.5160(c)
ASTM D 2879–83, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope	63.2406
ASTM D 2879–96, Standard Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope	63.2406
ASTM D 5066-91 (Reapproved 2001), Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis	63.3161(g)
ASTM D 5087-02, Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solvent-borne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)	63.3165(e), 63.3176 Appendix A
ASTM D 5291-02, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants	63.3981
ASTM D 5965-02, Standard Test Methods for Specific Gravity of Coating Powders	63.3151(b), 63.3951(c)
ASTM D 6053-00, Standard Test Method for Determination of Volatile Organic Compounds (VOC) Content of Electrical Insulating Varnishes	63.3981
ASTM D 6093–97 (Reapproved 2003), Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer	63.3161(f)(1); 63.3521(b)(1); 63.3941(b)(1); 63.4141(b)(1); 63.4741(b)(1); 63.4941(b)(1); 63.5160(c)
ASTM D 6266-00a, Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released from Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)	63.3165(e)
ASTM D 6348-03, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy	63 Subpart DDDD, Appendix B; 63 Subpart DDDD, Table 4
ASTM D 6420-99 (Reapproved 2004), Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry	63.2351; 63.2354
ASTM E 145–94 (Reapproved 2001), Standard Specification for Gravity-Convection and Forced-Ventilation Ovens	63.4581 Appendix A
National Council of the Paper Industry for Air and Stream Improvement (NCASI) P.O. Box 13318, Research Triangle Park, North Carolina 27709-3318
Method CI/WP-98.01, Chilled Impinger Method for Use at Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol, August 1998	63 Subpart DDDD, Table 4
Method IM/CAN/WP-99.02, Impinger/Canister Source Sampling Method for Selected HAPS and Other Compounds at Wood Products Facilities, January 2004	63 Subpart DDDD, Table 4; 63 Subpart DDDD, Appendix B
NCASI Method ISS/FP-A105.01, Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds, December 2005	63 Subpart DDDD, Table 4; 63 Subpart DDDD, Appendix B
U.S. Environmental Protection Agency, National Technical Information Service (NTIS) 5285 Port Royal Road, Springfield, VA
Interim Procedures for Estimating Risks Associated with Exposures to Mixtures of Chlorinated Dibenzo–p–Dioxins and –Dibenzofurans (CDDs and CDFs) and 1989 Update, EPA/625/3–89/016, March 1989 (NTIS No. PB 90–145756)	63.1513(d)

Need assistance?