e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 30—Mineral Resources
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

30 CFR (PARTS 200 to 699)
MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR
30 CFR
American Concrete Institute
P.O. Box 9094, Farmington Hill, Michigan 48333-9094
ACI Standard 318–95, Building Code Requirements for Reinforced Concrete, plus Commentary on Building Code Requirements for Reinforced Concrete (ACI 318R–95)
250.198; 250.901
ACI Standard 357–R–84 (Reapproved 1997), Guide for the Design and Construction of Fixed Offshore Concrete Structures
250.198; 250.901
American Institute of Steel Construction, Inc.
One East Wacker Drive, Suite 700, Chicago, Illinois 60601-1802
AISC 360-05: Standard Specification for Structural Steel Buildings, 2005
250.198; 250.901
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Telephone: 1-800-843-2763
ANSI/ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers, 2004 including July 1, 2005 Addenda
250.198; 250.803(b)(1), (b)(1)(i); 250.1629(b)(1), (b)(1)(i)
ANSI/ASME Boiler and Pressure Vessel Code, Section IV: Rules for Construction of Heating Boilers, including Appendices 1, 2, 3, 5, and 6 and non-Mandatory Appendices B, C, D, E, F, H, I, K, L and M, and the Guide to Manufacturers Data Report Forms, 2004 Edition, including July 1, 2005 Addenda
250.198; 250.803(b)(1), (b)(1)(i); 250.1629(b)(1); 250.1629(b)(1)(i)
ANSI/ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels, 2004, including July 2005 Addenda
250.198; 250.803(b)(1), (b)(1)(i); 250.1629(b)(1), (b)(1)(i)
ANSI/ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules, 2004, including 2005 Addenda
250.198; 250.803(b)(1)and (b)(1)(i); 250.1629(b)(1)and (b)(1)(i)
ANSI/ASME B 16.5–2003, Pipe Flanges and Flanged Fittings
250.198; 250.1002(b)(2)
ANSI/ASME B 31.8–2003, Gas Transmission and Distribution Piping Systems
250.198; 250.1002(a)
ANSI/ASME SPPE–1–1994 and SPPE–1d–1996 Addenda, Quality Assurance and Certification of Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations
250.198; 250.806(a)(2)(i)
ANSI Z88.2–1992, American National Standard for Respiratory Protection
250.198; 250.490
The American Petroleum Institute
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202) 682–8000
API 510, Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair and Alteration (Downstream Segment) Ninth edition, June 2006
250.198; 250.803; 250.1629
API Bulletin 2INT-DG, Interim Guidance for Design of Offshore Structures for Hurrican Conditions, Product No. G2DGINT, May 2007
250.195; 250.901
API Bulletin 2INT-EX, Interim Guidance for Assessment of Existing Offshore Structures for Hurrican Conditions, May 2007
250.195; 250.901
API Bulletin 2INT-MET, Interim Guidance on Hurricane Condidions in the Gulf of Mexico, Product No. G2INTMET, May 2007
250.195; 250.901
API RP 2A-WSD, Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms—Working Stress Design, Twenty-first Edition, December 2000, Errata and Supplements 1 (December 2002) and 2, (October 2005), API Stock No. G2AWSD
250.198; 250.901(a)(4); 250.908(a); 250.920
API RP 2D, Recommended Practice for Operation and Maintenance of Offshore Cranes, Fifth Edition, June 2003
250.108(a)(1); 250.198
API RP 2FPS, Recommended Practice for Planning, Designing, and Constructing Floating Production Systems, First edition, March 2001
250.198; 250.901
API RP 2RD, Recommended Practice for Design of Risers for Floating Production Systems (FPSs) and Tension Leg Platforms, First edition, June 1998, reaffirmed May 2006
250.198; 250.800; 250.901; 250.1002
API RP 2SK, Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures, Third edition, October 2005
250.198; 250.800; 250.901
API RP 2SM, Recommended Practice for Design, Manufacture, Installation, and Maintenance of Synthetic Fiber Ropes for Offshore Mooring, First edition, March 2001
250.198; 250.901
API RP 2T, Recommended Practice for Planning, Designing, and Constructing Tension Leg Platforms, Second edition, August 1997
250.198; 250.901
API RP 14B Recommended Practice for Design, Installation, Repair, and Operation of Subsurface Safety Valve Systems, Fifth Edition, October 2005, also available as ISO 10417: 2004 (Identical) Petroleum and Natural Gas Industries—Subsurface Safety Valve Systems—Design, Installation, Operation and Redress
250.198; 250.801(e)(4); 250.804(a)(1)(i)
API RP 14C Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms, Seventh Edition, March 2001
250.125; 250.198; 250.292; 250.802(b), (e)(2); 250.803(a), (b)(2)(i), (b)(4), (b)(5)(i), (b)(7), (b)(9)(v), (c)(2); 250.804(a), (a)(5); 250.1002(d); 250.1004(b)(9); 250.1628(c), (d)(2); 250.1629(b)(2), (b)(4)(v); 250.1630(a)
API RP 14E, Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems, Fifth Edition, October 1, 1991, reaffirmed June 2000
250.198; 250.802(e)(3); 250.1628(b)(2), (d)(3)
API RP 14F, Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations, Fourth Edition, June 1999, API Stock No. G14F04
250.114(c); 250.198; 250.803(b)(9)(v); 250.1629(b)(4)(v)
API RP 14FZ, Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Zone 0, Zone 1 and Zone 2 Locations, First Edition, September 2001, API Stock No. G14FZ1
250.114(c); 250.198; 250.803(b)(9)(v); 250.1629(b)(4)(v)
API RP 14G, Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms, Third Edition, December 1, 1993 (Reaffirmed June 2000)
250.198; 250.803(b)(8), (b)(9)(v); 250.1629(b)(3), (b)(4)(v)
API RP 14H, Recommended Practice for the Installation, Maintenance and Repair of Surface Safety Valves and Underwater Safety Valves Offshore, Fourth Edition, July 1, 1994, API Stock No. G14H04
250.198; 250.802(d); 250.804(a)(4)
API RP 14J, Recommended Practice for Design and Hazards Analysis for Offshore Production Facilities, Second edition, May 2001, API Order No. G14J02
250.198; 250.800; 250.901
API RP 53, Recommended Practice for Blowout Prevention Equipment Systems for Drilling Wells, Third Edition, reaffirmed September 2004
250.198; 250.442; 250.446
API RP 65, Recommended Practice for Cementing Shallow Water Flow Zones in Deep Water Wells, First Edition, September 2002
250.198; 250.415
API RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2, Second Edition, November 1997 (Reaffirmed November 2002)
250.114(a); 250.198; 250.459; 250.802(e)(4)(i); 250.803(b)(9)(i); 250.1628(b)(3); 250.1628(d)(4)(i); 250.1629(b)(4)(i)
API RP 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Zone 0, Zone 1, and Zone 2, First Edition, November 1997 (Reaffirmed November 2002)
250.114(a); 250.459; 250.802(e)(4)(i); 250.803(b)(9)(i); 250.1628(b)(3); 250.1628(d)(4)(i); 250.1629(b)(4)(i)
API Specification 2C, Specification for Offshore Pedestal Mounted Cranes, Sixth Edition, Effective date: September 2004
250.108; 250.198
API Spec 6A, Specification for Wellhead and Christmas Tree Equipment (also issued as ISO 10423:2003), Nineteenth Edition, Effective Date: February 1, 2005
250.198; 250.806(a)(3); 250.1002
API Spec 6A V1, Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service, First Edition, February 1, 1996 (Reaffirmed January 2003), API Stock No. G06AV1
250.198; 250.806(a)(3)
API Specification 6D: Specification for Pipeline Valves, Twenty-second edition, January 2002 (also available as ISO 14313:1999), MOD, Petroleum and Natural Gas Industries—Pipeline Transportation Systems—Pipeline Valves, Effective Date: July 1, 2002; Proposed National Adoption, includes Annex F, March 1, 2005
250.198; 250.1002(b)(1)
API Specification 14A, Specification for Subsurface Safety Valve Equipment, Tenth Edition, November 2000; also available as ISO 10432:1999, Petroleum and Natural Gas Industries—Downhole Equipment—Subsurface Safety Valve Equipment, Effective date: May 15, 2001
250.198; 250.806(a)(3)
API Specification 17J, Specification for Unbonded Flexible Pipe, Second edition dated November 1999, including Errata dated May 25, 2001 and Addendum 1 dated June 2003, effective date December 2002
250.198; 250.803; 250.1002; 250.1007
API Specification Q1, Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry dated June 15, 2003, including August 2003 errata, Seventh edition, also available as ISO/TS 29001, Effective Date: December 15, 2003
250.198; 250.806(a)(2)(ii)
API Standard 2551, Standard Method for Measurement and Calibration of Horizontal Tanks, First Edition, 1965, reaffirmed March 2002
250.198; 250.1202(l)(4)
API Standard 2552, Measurement and Calibration of Spheres and Spheroids, First Edition, 1966, reaffirmed February 2006
250.198; 250.1202(l)(4)
API Standard 2555, Method for Liquid Calibration of Tanks, First Edition, September 1966, reaffirmed March 2002
250.198; 250.1202(l)(4)
API RP 2556, Recommended Practice for Correcting Gauge Tables for Incrustation, Second Edition, August 1993 (Reaffirmed November 2003), API Stock No. H25560
250.198; 250.1202(l)(4)
API MPMS, Chapter 1, Vocabulary, Second Edition, July 1994, API Stock No., H01002
250.198; 250.1201
API MPMS, Chapter 2, Tank Calibration, Section 2A: Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method, First Edition, reaffirmed March 2002
250.198; 250.1202(1)(4)
API MPMS, Chapter 2, Section 2B, Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method, First Edition, March 1989, reaffirmed March 2002
250.198; 250.1202(1)(4)
API MPMS, Chapter 3, Tank Gauging, Section 1A, Standard Practice for the Manual Gauging of Petroleum and Petroleum Products, Second Edition, August 2005
250.198; 250.1202(1)(4)
API MPMS, Chapter 3, Section 1B, Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging, Second Edition, June 2001
250.198; 250.1202(1)(4)
API MPMS, Chapter 4, Proving Systems, Section 1: Introduction, Third Edition, February 2005
250.198; 250.1202(a)(3), (f)(1)
API MPMS, Chapter 4, Section 2: Displacement Provers, Third Edition, September 2003
250.198; 250.1202(a)(3), (f)(1)
API MPMS, Chapter 4, Section 4, Tank Provers, Second Edition, May 1998
250.198; 250.1202(a)(3), (f)(1)
API MPMS, Chapter 4, Section 5, Master-Meter Provers, Second Edition, May 2000
250.198; 250.1202(a)(3), (f)(1)
API MPMS, Chapter 4, Section 6, Proving Systems: Pulse Interpolation, Second Edition, 1999, reaffirmed 2003
250.198; 250.1202(a)(3) and (f)(1)
API MPMS, Chapter 4, Section 7, Proving Systems: Field Standard Test Measures, Second Edition, December 1998 reaffirmed 2003
250.198; 250.1202(a)(3), (f)(1)
API MPMS, Chapter 5: Metering, Section 1, General Considerations for Measurement by Meters, Measurement Coordination Department, Fourth Edition, September 2005
250.198; 250.1202(a)(3)
API MPMS, Chapter 5, Section 2, Measurement of Liquid Hydrocarbons by Displacement Meters, Third Edition, September 2005
250.198; 250.1202(a)(3)
API MPMS, Chapter 5, Section 3, Measurement of Liquid Hydrocarbons by Turbine Meters, Fifth Edition, September 2005,
250.198; 250.1202(a)(3)
API MPMS, Chapter 5, Section 4, Accessory Equipment for Liquid Meters, Fourth Edition, September 2005
250.198; 250.1202(a)(3)
API MPMS, Chapter 5, Section 5, Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems, Second Edition, August 2005
250.198; 250.1202(a)(3)
API MPMS, Chapter 6, Metering Assemblies, Section 1, Lease Automatic Custody Transfer (LACT) Systems, Second Edition, May 1991, reaffirmed March 2002
250.198; 250.1202(a)(3)
API MPMS, Chapter 6, Section 6, Pipeline Metering Systems, Second Edition, May 1991, reaffirmed March 2002
250.198; 250.1202(a)(3)
API MPMS, Chapter 6, Section 7, Metering Viscous Hydrocarbons, Second Edition, May 1991, reaffirmed March 2002
250.198; 250.1202(a)(3)
API MPMS, Chapter 7, Temperature Determination—Measurement Coordination, First edition, June 2001
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 8, Sampling, Section 1, Standard Practice for Manual Sampling of Petroleum and Petroleum Products, Third Edition, October 1995, reaffirmed March 2006
250.198; 250.1202(b)(4)(i), (l)(4)
API MPMS, Chapter 8, Section 2, Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products, Second Edition, October 1995, reaffirmed June 2005
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 9, Density Determination, Section 1, Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method, Second edition, reaffirmed October 2005
250.198; 250.1202(a)(3); 250.1202(l)(4)
API MPMS Chapter 9, Section 2—Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, Second edition, March 2003
250.198; 250.1202(a)(3); 250.1202(l)(4)
API MPMS, Chapter 10, Sediment and Water, Section 1, Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method, Second Edition, October 2002
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 10, Section 2, Determination of Water in Crude Oil by Distillation Method, First Edition, April 1981, reaffirmed 2005
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 10, Section 3, Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure), Second Edition, May 2003
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 10, Section 4, Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure), Third Edition, December 1999
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 10, Sediment and Water, Section 9, Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration, Second Edition, reaffirmed 2005
250.198; 250.1202(a)(3), (l)(4)
API MPMS, Chapter 11, Physical Properties Data, Addendum to Section 2, Part 2, Compressibility Factors for Hydrocarbons, Correlation of Vapor Pressure for Commercial Natural Gas Liquids, First Edition, reaffirmed December 2002
250.198; 250.1202(a)(3)
API MPMS, Chapter 11.1, Volume Correction Factors, Volume I, Table 5A—Generalized Crude Oils and JP–4 Correction of Observed API Gravity to API Gravity at 60° F, and Table 6A—Generalized Crude Oils and JP–4 Correction of Volume to 60° F Against API Gravity at 60° F, API Standard 2540, First Edition, August 1980, reaffirmed March 1997; API Stock No. H27000
250.198; 250.1202(a)(3), (g)(3), (l)(4)
API MPMS, Chapter 11.2.2, Compressibility Factors for Hydrocarbons: 0.350–0.637 Relative Density (60° F/60° F) and –50° F to 140° F Metering Temperature, Second Edition, October 1986, reaffirmed December 2002
250.198; 250.1202(a)(3), (g)(4)
API MPMS, Chapter 12, Calculation of Petroleum Quantities, Section 2, Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 1: Introduction, Second Edition, May 1995 (Reaffirmed March 2002)
250.198; 250.1202
API MPMS, Chapter 12, Calculation of Petroleum Quantities, Section 2, Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors, Part 2: Measurement Tickets, Third Edition, June 2003
250.198; 250.1202
API MPMS, Chapter 14, Natural Gas Fluids Measurement, Section 3, Concentric Square-Edged Orifice Meters, Part 1: General Equations and Uncertainty Guidelines, Third Edition, reaffirmed January 2003
250.198; 250.1203(b)(2)
API MPMS, Chapter 14, Section 3, Part 2, Specification and Installation Requirements, Fourth Edition, reaffirmed March 2006
250.198; 250.1203(b)(2)
API Chapter 14---Natural Gas Fluids Measurement, Section 3—Concentric, Square-Edged Orifice Meters, Part 3—Natural Gas Applications, Third Edition, reaffirmed January 2003
250.198; 250.1203(b)(2)
API MPMS, Chapter 14.5, Calculation of Gross Heating Value, Relative Density, and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis, Second Edition, reaffirmed March 2002
250.198; 250.1203(b)(2)
API MPMS, Chapter 14, Section 6, Continuous Density Measurement, Second Edition, April 1991, reaffirmed 2006
250.198; 250.1203(b)(2)
API MPMS, Chapter 14, Section 8, Liquefied Petroleum Gas Measurement, Second Edition, July 1997; reaffirmed March 2002
250.198; 250.1203(b)(2)
API MPMS, Chapter 20, Section 1, Allocation Measurement, First Edition, reaffirmed October 2006
250.198; 250.1202(k)(1)
API MPMS, Chapter 21, Flow Measurement Using Electronic Metering Systems, Section 1 - Electronic Gas Measurement, First Edition, reaffirmed July 2005
250.198; 250.1203(b)(4)
The American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
ASTM Standard C 33–99a, Standard Specification for Concrete Aggregates
250.198; 250.901(a)
ASTM Standard C94/C94M–99, Standard Specification for Ready-Mixed Concrete
250.198; 250.901(a)
ASTM Standard C 150–99, Standard Specification for Portland Cement
250.198; 250.901(a)
ASTM Standard C 330–99, Standard Specification for Lightweight Aggregates for Structural Concrete
250.198; 250.901(a)
ASTM Standard C 595–98, Standard Specification for Blended Hydraulic Cements
250.198; 250.901(a)
The American Welding Society
550 NW LeJeune Road, P.O. Box 351040, Miami, Florida 33135
AWS D1.1–2000, Structural Welding Code—Steel, 2000
250.198; 250.901(a)
AWS D1.4–98, Structural Welding Code—Reinforcing Steel, 1998
250.198; 250.901(a)
ANSI/AWS D3.6M, Specification for Underwater Welding, 1999
250.198; 250.901(a)
The National Association of Corrosion Engineers
First Services Department, 1440 South Creek Drive, Houston, Texas 77218
NACE Standard MR0175–2003, Standard Material Requirements: Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments, 2003
250.198; 250.901(a)
NACE Standard RP 01–76–2003, Standard Recommended Practice, Corrosion Control of Steel Fixed Offshore Structures Associated with Petroleum Production
250.198; 250.901(a)

Need assistance?