e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 30—Mineral Resources
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

30 CFR (PARTS 1 TO 199)
MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

(Copies of material incorporated in Parts 56 and 57 are available at MSHA Metal and Nonmetal Mine Safety and Health District Offices. Copies of material incorporated in Parts 70, 71, 75 and 77 are available at MSHA Coal Mine Safety and Health District and Subdistrict Offices. For a complete listing of these addresses, see the end of this table.)
30 CFR
American Conference of Governmental Industrial Hygienists
P.O. Box 1937, Cincinnati, OH 45201
Threshold Limit Values for Substances in Workroom Air (1972)
70.1900
TLVs: Threshold Limit Values for Chemical Substances in Workroom Air (1973)
56.5001; 57.5001
TLVs: Threshold Limit Values of Airborne Contaminants (1972)
71.700; 75.322
American Insurance Association
85 John St., New York, NY 10038
National Building Code, 1967
71.402; 75.1712–3
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
ANSI N13.8–73 Radiation Protection in Uranium Mines
57.5037; 57.5040; 57.5047
ANSI S1.4–71 Specifications for Sound Level Meters
56.5050; 57.5050; 70.500; 70.505
ANSI–ASA 40.8–55 National Plumbing Code
71.402; 71.602; 75.1712–3
ANSI Z88.2–69 Practices for Respiratory Protection
56.5005; 57.5005; 72.710
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763
ASME Boiler and Pressure Vessel Code, 1977:
  Sections I–VIII
56.13001; 57.13001
  Sections I–VII
56.13030; 57.13030
ASME Boiler and Pressure Vessel Code, 1971:
  Sections I–VIII
77.411
  Section VIII
75.1730
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
Book of ASTM Standards, 1968: Part 28, Rubber, Carbon Black; Gaskets
75.705–8; 77.704–8
ASTM E 72–80 Standard Methods of Conducting Strength Tests of Panels for Building Construction
75.333(e)(1)(i)
ASTM E 119–88 Standard Test Methods for Fire Tests of Building Construction and Materials
75.301; 75.1900
ASTM E 162–87 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
75.333(d), (e), and (f); 75.335(a)
ASTM F 496-97, Standard Specification for In-Service Care of Insulating Gloves and Sleeves
75.818
American Welding Society
550 N.W. LeJeune Road, Miami, FL 33126
AWS D1.1–1973 Structural Welding Code
77.403a
AWS D14.4–77, Classification and Application of Welded Joints for Machinery and Equipment
7.304
California, State of
California Administrative Code: Title 8
  Article 7—Logging and Sawmill Safety Orders Section 5243—Tractor Yarding (Register 69, No. 10—3–8–69)
77.403a
  Article 10—Construction Safety Orders Sections 1591(i) and 1596—Haulage and Earth Moving (Register 70, No. 40—10–3–70)
77.403a
  Section 2655—Overhead Guards for High-Lift Rider Trucks (Register 72, No.6—2–8–72)
77.403
Corps of Engineers, Department of the Army
EM–385–1–1 General Safety Requirements, 1967
77.403a
Department of Defense
DODSSP Standardization Document Order Desk, 700 Robbins Ave., Bldg. 4D, Philadelphia, PA 19111–5098
Military specifications:
  MIL–F–15160D Fuses; Instrument, Power, and Telephone
28.31
  MIL–STD–105D Sampling Procedures and Tables for Inspection by Attributes
29.41
  MIL–STD–248 Welding and Brazing: Procedure and Performance Qualification
77.403a
  MIL–STD–414 Sampling Procedures and Tables for Inspection by Variables for Percent Defective
29.41
Institute of Electrical and Electronics Engineers, Inc.
Service Center, 445 Hoes Lane, Piscataway, NJ 08855; Telephone: (800) 678–4333
IEEE standard No. 32—1972 Requirements, Terminology, and Test Procedures for Neutral Grounding Devices
75.1719–2; 77.801–1; 77.901–1
Department of the Interior
Bureau of Mines Instruction Guide No. 2—MSA W–65 Self Rescuer (1972)
57.18028
Bureau of Mines Instruction Guide No. 3—Permissible Drager 810 Respirator for Self-Rescue (1972)
57.18028
Bureau of Mines Instruction Guide No. 19—Mine Emergency Training (1972)
57.18028
Institute of Makers of Explosives
1420 Lexington Ave., New York, NY 10017
IME Safety Library Publication No. 22—Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials, May, 1993
56.6000; 56.6133(b); 56.6201(a)(2) and (b)(2); 57.6000; 57.6133(b); 57.6201(a)(2) and (b)(2)
Generic Loading Guide for the IME–22 Container, October, 1993
56.6000; 56.6133(b); 56.6201(a)(2) and (b)(2); 57.6000; 57.6133(b); 57.6201(a)(2) and (b)(2)
International Electrical Commission
Central Office 3, rue de Varembe, P.O. Box 131, CH-1211, Geneva 20, Switzerland
IEC 60079-0: Standards for Electrical Apparatus for Explosive Gas Atmospheres—Part 0: General, Fourth edition, January 2004
7.10; 18.6
IEC 60079-1: Standards for Electrical Apparatus for Explosive Gas Atmospheres—Part 1: Flameproof Enclosures “d”, Fifth edition, November 2003
7.10; 18.6
Mine Safety and Health Administration, Department of Labor
MSHA Information Report No. IR 1240 (1996): Calibration and Maintenance Procedures for Coal Mine Respirable Dust Samplers
70.204; 71.204; 90.204
National Board of Boiler and Pressure Vessel Inspectors
1055 Crupper Ave., Columbus, OH 43229
National Board Inspection Code, 1979
56.13015; 57.13015
  Chapter I–V and Appendices
56.13030; 57.13030
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
National Electrical Code, 1968
56.12045; 56.12048; 57.12045; 57.12048; 75.513–1; 75.518–1; 77.503–1; 77.506–1; 77.516; 77.901
NFPA 11A—1970 High Expansion Foam Systems
75.1107–16
NFPA 13—1968–1969 Installation of Sprinkler Systems
75.1101–7
NFPA 13A—1971 Care and Maintenance of Sprinkler Systems
75.1107–16
NFPA 15—1969 Water Spray Fixed Systems for Fire Protection
75.1107–16
NFPA 17—1969 Dry Chemical Extinguishing Systems
75.1107–16
NFPA 22—1971 Water Tanks for Private Fire Protection
75.1107–3; 75.1107–13
NFPA 60—1961 Installation and Operation of Pulverized Fuel Systems
77.301
NFPA 72A—1967 Local Protective Signaling Systems
75.1103–2; 75.1107–4; 75.1107–16
NFPA 198—1969 Care of Fire Hose
75.1107–16
National Institute of Standards and Technology (formerly National Bureau of Standards), Department of Commerce
National Electrical Safety Code, 1961; Part 2: Safety Rules for the Installation and Maintenance of Electric Supply and Communications Lines; and Supplement 2 (1968)
56.12047; 57.12047
National Electrical Safety Code, 1971
77.807–1
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096; Telephone: (412) 776–4841
SAE J167—1974 Protective Frame with Overhead Protection—Test Procedures and Performance Requirements
77.403a
SAE J231—1971 Minimum Performance Criteria for Falling Object Protection Structures (FOPS)
77.403
SAE J320a—1967 (R 69; 1970 editorial change) Roll–Over Protective Structures for Rubber-Tired Self-Propelled Scrapers
77.403a
SAE J320b—1967 (R 72; 1972 editorial change) Roll-Over Protective Structures for Prime Movers
77.403a
SAE J334a—1968 (R 70) Protective Frame Procedure and Performance Requirements
77.403a
SAE J386—1985, 1993, 1997 Operator Restraint System for Off-road Work Machines
56.14130; 56.14131; 57.14130; 57.14131
SAE J394—1969 (1970 editorial change) Roll-Over Protective Structures for Rubber-Tired Front-End Loaders and Rubber-Tired Dozers
77.403a
SAE J394a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Wheeled Front-End Loaders and Wheeled dozers
77.403a
SAE J395—1969 (1970 editorial change) Roll-Over Protective Structures for Crawler Tractors and Crawler-Type Loaders
77.403a
SAE J395a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Track-Type Tractors and Track-Type Front-End Loaders
77.403a
SAE J396—1969 (1970 editorial change) Roll-Over Protective Structures for Motor Graders
77.403a
SAE J396a—1969 (R 72; 1972 editorial change) Roll-Over Protective Structures for Motor Graders
77.403a
SAE J397—1969 Critical Zone—Characteristics and Dimensions for Operators of Construction and Industrial Machinery
77.403a
SAE J397a—1969 (R 72; 1973 editorial change) Deflection Limiting Volume for Laboratory Evaluation of Roll-Over Protective Structures (ROPS) and Falling Object and Protective Structures (FOPS) of Construction and Industrial Vehicles
77.403a
SAE J429d—1967 Mechanical and Quality Requirements for Externally Threaded Fasteners
77.403a
SAE J429e—1969 Mechanical and Quality Requirements for Externally Threaded Fasteners
77.403a
SAE J429f—1971 Mechanical and Quality Requirements for Externally Threaded Fasteners
77.403a
SAE J429g—1977 Mechanical and Quality Requirements for Externally Threaded Fasteners
77.403a
SAE J995—1967 Mechanical and Quality Requirements for Steel Nuts
77.403a
SAE J995a—1969 Mechanical and Quality Requirements for Steel Nuts
77.403a
SAE J995b—1971 Mechanical and Quality Requirements for Steel Nuts
77.403a
SAE J1040—1986 Performance Criteria for Roll-over Protective Structures for Construction, Earthmoving, Foestry, and Mining Machines
56.14130; 57.14130
SAE J1194—1983, 1989, 1994, 1999 Roll-over Protective Structures for Wheeled Agricultural Tractors
56.14130; 57.14130
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112; Telephone: (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105; Telephone: (800) 854–7179
UL–198—1971 UL Standard for Alternating Current Fuses
28.40
MSHA District Office Addresses
Coal Mine Safety and Health
District 1, 7 North Wilkes-Barre Boulevard, Wilkes-Barre, PA 18702.
District 2, 319 Paintersville Road, Hunker, PA 15639
District 3, 5012 Mountaineer Mall, Morgantown, WV 26505
District 4, 100 Bluestone Road, Mount Hope, WV 25880
District 5, Wise County Plaza, 2nd Floor, P.O. Box 560, Norton, VA 24273
District 6, 100 Fae Ramsey Lane, Pikeville, KY 41501–3211
District 7, 3837 S. U.S. Highway 25E, Barbourville, KY 40906
District 8, 2300 Willow Street, Suite 200, Vincennes, IN 47591
District 9, 730 Simms Street, Room 440, Golden, CO 80401
District 10, 100 YMCA Drive, Madisonville, KY 42431–9019
District 11, 135 Gemini Circle, Suite 213, Birmingham, AL 35209
MSHA District Office Addresses
Metal and Nonmetal Mine Safety and Health
Northeastern District, 547 Keystone Drive, Warrendale, PA 15086–7573
Southeastern District, 135 Gemini Circle, Suite 212, Birmingham, AL 35209
North Central District, 515 West First Street, Number 333, Duluth, MN 55802–1302
South Central District, 1100 Commerce Street, Room 462, Dallas, TX 75242–0499
Rocky Mountain District, 730 Simms Street, Golden, CO 80401–4720
Western District, 2060 Peabody Road, Suite 610, Vacaville, CA 95687

Need assistance?