e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 29—Labor
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

29 CFR (PART 1926)
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

(Copies of the documents listed in this table are available through the Technical Data Center, U.S. Department of Labor, Washington, DC, and through Regional Offices of the Occupational Safety and Health Administration. For a complete listing of these addresses, see the end of this table.)
29 CFR
American Conference of Governmental Industrial Hygienists
P.O. Box 1937, Cincinnati, OH 45201
ACGHI Threshold Limit Values (1970)
1926.55
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
ANSI A10.3–70 Safety Requirements for Explosive–Actuated Fastening Tools
1926.302
ANSI A10.4–63 Safety Requirements for Workmen's Hoists
1926.552
ANSI A10.5–69 Safety Requirements for Material Hoists
1926.552
ANSI A11.1–65 (R 70) Practices for Industrial Lighting (IES RP7–1965)
1926.56
ANSI A14.1–69 Safety Code for Portable Wood Ladders
1926.450; 1926.451
ANSI A14.2–56 Safety Code for Portable Metal Ladders
1926.450; 1926.451
ANSI A14.3–56 Safety Code for Fixed Ladders
1926.450
ANSI A17.1–65 Safety Code for Elevators, Dumbwaiters and Moving Walks
1926.552
ANSI A17.1a–67 Supplement to A17.1–65
1926.552
ANSI A17.1b–68 Supplement to A17.1–65 and A17.1a–67
1926.552
ANSI A17.1c–69 Supplement to A17.1–65, A17.1a–67, and A17.1b–68
1926.552
ANSI A17.1d–70 Supplement to A17.1–65, A17.1a–67, A17.1b–68, and A17.1c–69
1926.552
ANSI A17.2–60 Practice for the Inspection of Elevators (Inspector's Manual)
1926.552
ANSI A17.2a–65 Addenda to A17.2–60
1926.552
ANSI A17.2B–67 Supplement to A17.2–60
1926.552
ANSI A92.2–69 Vehicle Mounted Elevating and Rotating Work Platforms
1926.451; 1926.453
ANSI A120.1–70 Safety Code for Power-Operated Platforms Used for Exterior Building Maintenance
1926.451
ANSI B7.1–70 Safety Code for the Use, Care and Protection of Abrasive Wheels
1926.303
ANSI B15.1–53 (R 58) Safety Code for Mechanical Power-Transmission Apparatus
1926.300; 1926.550
ANSI B20.1–57 Safety Code for Conveyors, Cableways and Related Equipment
1926.555
ANSI B30.2.0–67 Safety Code for Overhead and Gantry Cranes (Partial Revision of B30.2–43)
1926.550
ANSI B30.5–68 Safety Code for Crawler, Locomotive and Truck Cranes (Partial Revision of B30.2–43)
1926.550
ANSI B30.6–69 Safety Code for Derricks (Partial Revision of B30.2–43)
1926.550
ANSI B56.1—69 Safety Standards for Powered Industrial Trucks (ISO R1074)
1926.602
ANSI D6.1—71 Manual on Uniform Traffic Control Devices for Streets and Highways
1926.200; 1926.201; 1926.202
ANSI J6.1—50 (R 71) Rubber Insulating Line Hose
1926.951
ANSI J6.2—50 (R 71) Rubber Insulating Hoods
1926.951
ANSI J6.4—71 Rubber Insulating Blankets
1926.951
ANSI J6.5—71 Rubber Insulating Sleeves
1926.951
ANSI J6.6—71 Rubber Insulating Gloves
1926.951
ANSI J6.7—35 Rubber Matting for Use Around Electrical Apparatus
1926.951
ANSI O1.1—61 Safety Code for Woodworking Machinery
1926.304
ANSI Z35.1—68 Specifications for Accident Prevention Signs
1926.200
ANSI Z35.2—68 Specifications for Accident Prevention Tags
1926.200
ANSI Z49.1—67 Safety in Welding and Cutting
1926.350
ANSI Z87.1—68 Practice for Occupational and Educational Eye and Face Protection (Partial Revision of Z2.1—59)
1926.102
ANSI Z89.1—69 Safety Requirements for Industrial Head Protection
1926.100
ANSI Z89.2—71 Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
1926.100; 1926.951
American Society of Agricultural Engineers (ASAE)
2950 Niles Rd., P.O. Box 229, St. Joseph, MI 49085
ASAE R313.1 Soil Cone Penetrometer, 1971 (Reaffirmed 1975)
1926.1002
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Telephone: 1-800-843-2763
Power Boilers (Sec. I), 1968
1926.603
Pressure Vessels (Sec. VIII), 1968
1926.603
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
ASTM A 370–68 Methods and Definitions for Mechanical Testing of Steel Products
1926.1001
ASTM B 117–64 (50 Hour Test)
1926.959
ASTM D 56–69 Test for Flash Point by the Tag Closed Tester
1926.155
ASTM D 93–69 Test for Flash Point by the Pensky-Martens Closed Tester
1926.155
ASTM D 323–58 (R–68) Test for Vapor Pressure of Petroleum Products (Reid Method)
1926.155
American Traffic Safety Services Association
15 Riverside Parkway, Suite 100, Fredericksburg, VA 22406-1022
Part VI of the Manual on Uniform Traffic Control Devices, Millenium Edition, December 2000
1926.200(g); 1926.201; 1926.202
California, State of
Construction Safety Orders, Department of Industrial Relations: Division 5, Labor Code, Section 6312
1926.1000
Commerce, Department of
National Institute of Standards and Technology (formerly National Bureau of Standards) (Dept. of Commerce) PS 1–66, American Plywood Association (1966); PS 20–79, American Softwood Lumber Association (1970)
1926.451
General Services Administration
QQ–P–416, Federal Specification Plating Cadmium (Electrodeposited)
1926.104
Institute of Makers of Explosives
1420 Lexington Ave., New York, NY 10017
Publication No. 2, June 5, 1964, American Table of Distances for Storage of Explosives
1926.914
Publication No. 20, March 1968, Radio Frequency Energy—A Potential Hazard in the Use of Electric Blasting Caps
1926.900
Interior, Department of
Bureau of Reclamation (Dept. of Interior) Safety and Health Regulations for Construction, Part II, (Sept. 1971)
1926.1000
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
NFPA 10A—1970 Recommended Good Practice for the Maintenance and Use of Portable Fire Extinguishers
1926.150
NFPA 13—1969 Standards for the Installation of Sprinkler Systems
1926.152
NFPA 30—1969 Flammable and Combustible Liquid Code, Chapters III and IV
1926.152
NFPA 70—1971 National Electrical Code (ANSI C1–1971)
1926.151; 1926.351; 1926.400; 1926.401; 1926.404; 1926.803
NFPA 80—1970 Standards for Fire Doors and Windows
1926.152
NFPA 251—1969 Standard Methods of Fire Tests of Building Construction and Materials
1926.151; 1926.155
NFPA 385—1966 Recommended Regulatory Standards for Tank Vehicles and Flammable and Combustible Liquids
1926.152
Power Crane and Shovel Association
Std. No. 1—1968 Mobile Crane and Excavator Standards
1926.602
Std. No. 2—1968 Mobile Hydraulic Crane Standards
1926.550; 1926.602
Std. No. 3—1969 Mobile Hydraulic Excavator Standards
1926.602
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096; Telephone: (412) 776–4841
SAE Handbook—1970, pages 1088–1103 (Nomenclature and Description)
1926.602
SAE Handbook—1971
1926.1001; 1926.1002
SAE J166—1971 Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons
1926.602
SAE J167—1970 Protective Frame with Overhead Protection—Test Procedures and Performance Requirements
1926.1003
SAE J168 (July 1970) Protective Enclosures—Test Procedures and Performance Requirements
1926.1002
SAE J236—1971 Minimum Performance Criteria for Brake Systems for Rubber-Tire Self-Propelled Graders
1926.602
SAE J237—1971 Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers
1926.602
SAE J319b—1971 Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers
1926.602
SAE J320a—1971 Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers
1926.1001
SAE J321a—1970 Fenders for Pneumatic-Tired Earthmoving Haulage Equipment
1926.602
SAE J333a—1970 Operation Protection for Wheel-Type Agricultural and Industry Tractors
1926.602
SAE J386—1969 Seat Belt for Construction Equipment
1926.602
SAE J394—1971 Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers
1926.1001
SAE J395—1971 Minimum Performance Criteria for Roll-Protective Structures for Crawler Tractors and Crawler-Type Loaders
1926.1001
SAE J396—1971 Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders
1926.1001
SAE J397—1969 Critical Zone Characteristics and Dimensions for Operators of Construction and Industrial Machinery
1926.1001
SAE J743a—1964 Tractor Mounted Side Boom
1926.550
SAE J959—1966 Lifting Crane Wire-Rope Strength Factors
1926.550
U.S. Army
Corps of Engineers EM–385–1 (Mar. 1967), General Safety Requirements
1926.1000
Addresses
Technical Data Center: Frances Perkins Department of Labor Building, Room N2625, 200 Constitution Ave., NW., Washington, DC 20210.
Boston Regional Office—Region I: Regional Administrator, U.S. Department of Labor—OSHA, JFK Federal Building, Rm. E–340, Boston, MA 02203.
New York Regional Office—Region II: Regional Administrator, U.S. Department of Labor—OSHA, 201 Varick St., Room 670, New York, NY 10014.
Philadelphia Regional Office—Region III: Regional Administrator, U.S. Department of Labor—OSHA, Gateway Bldg., Suite 2100, 3535 Market St., Philadelphia, PA 19104.
Atlanta Regional Office—Region IV: Regional Administrator, U.S. Department of Labor—OSHA, 1375 Peachtree St., NE., Suite 587, Atlanta, GA 30367.
Chicago Regional Office—Region V: Regional Administrator, U.S. Department of Labor—OSHA, 32nd Fl., Room 3244, 230 S. Dearborn St., Chicago, IL 60604.
Dallas Regional Office—Region VI: Regional Administrator, U.S. Department of Labor—OSHA, 555 Griffin St., Room 602, Dallas, TX 75202.
Kansas City Regional Office—Region VII: Regional Administrator, U.S. Department of Labor—OSHA, 1100 Main St., Kansas City, MO 64106.
Denver Regional Office—Region VIII: Regional Administrator, U.S. Department of Labor—OSHA, 1999 Broadway, Suite 1690, Denver, CO 80202–5716.
San Francisco Regional Office—Region IX: Regional Administrator, U.S. Department of Labor—OSHA, 71 Stevenson St., Suite 420, San Francisco, CA 94105.
Seattle Regional Office—Region X: Regional Administrator, U.S. Department of Labor—OSHA, 1111 Third Avenue, Suite 715, Seattle, WA 98101–3212.

Need assistance?