e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 29—Labor
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

29 CFR (PART 1900 TO 1910.999)
OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

(Copies of the documents listed in this table are available through the Technical Data Center, U.S. Department of Labor, Washington, DC, and through Regional Offices of the Occupational Safety and Health Administration. For a complete listing of these addresses, see the end of this table.)
29 CFR
Agriculture Ammonia Institute—Rubber Manufacturers Association
1400 K Street, NW., Washington, DC 20005
AAI—RMA Specifications for Anhydrous Ammonia Hose
1910.111
American Conference of Governmental Industrial Hygienists
P.O. Box 1937, Cincinnati, OH 45201
ACGIH Manual “Industrial Ventilation” (1970)
1910.94
ACGIH Industrial Ventilation: A Manual of Recommended Practice, 22d Edition, 1995
1910.6; 1910.124(b)(4)(iii)
Threshold Limit Values and Biological Exposure Indices for 1986–87 (1986)
1910.120
American Society of Agricultural Engineers (ASAE)
2950 Niles Road, P.O. Box 229, St. Joseph, MO 49085
ASAE Emblem for Identifying Slow Moving Vehicles, ASAE S276.2 (1968)
1910.145
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036; Telephone: (212) 642–4900
ANSI A10.2–44 Safety Code for Building Construction
1910.144
ANSI A10.3–70 Safety Requirements for Explosive-Actuated Fastening Tools
1910.243
ANSI A11.1–65 (R 70) Practice for Industrial Lighting
1910.219; 1910.261; 1910.265
ANSI A11.1–65 Practice for Industrial Lighting
1910.262; 1910.265
ANSI A12.1–67 Safety Requirements for Floor and Wall Openings, Railings, and Toe Boards
1910.66; 1910.68; 1910.261
ANSI A13.1–56 Scheme for the Identification of Piping Systems
1910.253; 1910.261; 1910.262
ANSI A14.1–68 Safety Code for Portable Wood Ladders, Supplemented by ANSI A14.1a–77
1910.261
ANSI A14.2–56 Safety Code for Portable Metal Ladders, Supplemented by ANSI A14.2a–77
1910.261
ANSI A14.3–56 Safety Code for Fixed Ladders
1910.68; 1910.179; 1910.261
ANSI A17.1–65 Safety Code for Elevators, Dumbwaiters and Moving Walks, Including Supplements, A17.1a (1967); A17.1b (1968); A17.1c (1969); A17.1d (1970)
1910.261
ANSI A17.2–60 Practice for the Inspection of Elevators, Including Supplements, A17.2a (1965), A17.2b (1967)
1910.261
ANSI A90.1–69 Safety Standard for Manlifts
1910.68
ANSI A92.2–69 Standard for Vehicle Mounted Elevating and Rotating Work Platforms
1910.67; 1910.268
ANSI A120.1–70 Safety Code for Powered Platforms for Exterior Building Maintenance
1910.66
ANSI B7.1–70 Safety Code for the Use, Care and Protection of Abrasive Wheels
1910.94; 1910.215; 1910.218
ANSI B15.1–53 (R 58) Safety Code for Mechanical Power Transmission Apparatus
1910.68; 1910.261
ANSI B20.1–57 Safety Code for Conveyors, Cableways, and Related Equipment
1910.218; 1910.261; 1910.265
ANSI B30.2–43 (R 52) Safety Code for Cranes, Derricks, and Hoists
1910.261
ANSI B30.2.0–67 Safety Code for Overhead and Gantry Cranes
1910.179; 1910.261
ANSI B30.5–68 Safety Code for Crawler, Locomotive, and Truck Cranes
1910.180; 1910.261
ANSI B30.6–69 Safety Code for Derricks
1910.181; 1910.268
ANSI B31.1–55 Code for Pressure Piping
1910.261
ANSI B31.1a–63 Addenda to ANSI B31.1 (1955)
1910.261
ANSI B31.1.0–67 and Addenda B31.1.0a (1969) Code for Pressure Piping
1910.103; 1910.104; 1910.218; 1910.261
ANSI B31.2–68 Fuel Gas Piping
1910.261
ANSI B31.3–66 Petroleum Refinery Piping
1910.103
ANSI B31.5–66 Addenda B31.5a (1968) Refrigeration Piping
1910.103; 1910.111
ANSI B56.1–69 Safety Standard for Powered Industrial Trucks
1910.178; 1910.261
ANSI B57.1–65 Compressed Gas Cylinder Valve Outlet and Inlet Connections
1910.253
ANSI B71.1–68 Safety Specifications for Power Lawn Mowers
1910.243
ANSI B175.1–1991, Safety Requirements for Gasoline-Powered Chain Saws
1910.266
ANSI C1–71 National Electrical Code
1910.66
ANSI D8.1–67 Practices for Railroad Highway Grade Crossing Protection
1910.265
ANSI H23.1–70 Seamless Copper Water Tube Specification
1910.110
ANSI H38.7–69 Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube
1910.110
ANSI J6.4–71 Standard Specification for Rubber Insulating Blankets
1910.268
ANSI J6.6–71 Standard Specification for Rubber Insulating Gloves
1910.268
ANSI K13.1–67 Identification of Gas Mask Canisters
1910.261
ANSI K61.1–60 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
1910.111
ANSI K61.1–66 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
1910.111
ANSI O1.1–54 (R 61) Safety Code for Woodworking Machinery
1910.261
ANSI S1.4–71 (R 76) Specification for Sound Level Meters
1910.95
ANSI S1.11–71 (R 76) Specification for Octave, Half-Octave and Third-Octave Band Filter Sets
1910.95
ANSI S3.6–69 Specifications for Audiometers
1910.95
ANSI Z4.1–68 Requirements for Sanitation in Places of Employment
1910.261
ANSI Z4.2–42 Standard Specifications for Drinking Fountains
1910.142
ANSI Z9.1–51 Safety Code for Ventilation and Operation of Open Surface Tanks
1910.94; 1910.261
ANSI Z9.1–71 Practices for Ventilation and Operation of Open-Surface Tanks
1910.6; 1910.124(b)(4)(iv)
ANSI Z9.2–60 Fundamentals Governing the Design and Operation of Local Exhaust Systems
1910.94; 1910.261
ANSI Z9.2–79 Fundamentals Governing the Design and Operation of Local Exhaust Systems
1910.6; 1910.124(b)(4)(i)
ANSI Z12.12–68 Standard for the Prevention of Sulfur Fires and Explosions
1910.261
ANSI Z12.20–62 (R 69) Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manufacturing Plants
1910.265
ANSI Z21.30–64 Requirements for Gas Appliances and Gas Piping Installations
1910.265
ANSI Z24.22–57 Method of Measurement of Real-Ear Attenuation of Ear Protectors at Threshold
1910.261
ANSI Z33.1–61 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
1910.261; 1910.265
ANSI Z33.1–66 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying
1910.94
ANSI Z35.1–68 Specifications for Accident Prevention Signs
1910.261
ANSI Z41.1–67 Men's Safety Toe Footwear
1910.94; 1910.136; 1910.261
ANSI Z41–91, Personal Protection-Protective Footwear
1910.136
ANSI Z48.1–54 Method for Marking Portable Compressed Gas Containers to Identify the Material Contained
1910.103; 1910.110; 1910.253
ANSI Z48.1–54 (R 70) Method for Marking Portable Compressed Gas Containers To Identify the Material Contained
1910.111; 1910.134
ANSI Z49.1–67 Safety in Welding and Cutting
1910.252
ANSI Z53.1–67 Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment
1910.97; 1910.145
ANSI Z54.1–63 Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources
1910.252
ANSI Z87.1–68 Practice of Occupational and Educational Eye and Face Protection
1910.133; 1910.252; 1910.261
ANSI Z87.1–89, Practice for Occupational and Educational Eye and Face Protection
1910.133
ANSI Z88.2–69 Practices for Respiratory Protection
1910.94; 1910.134; 1910.261; 1910.266
ANSI Z89.1–69 Safety Requirements for Industrial Head Protection
1910.135; 1910.261; 1910.266
ANSI Z89.1–86, Protective Headwear for Industrial Workers Requirements
1910.135
ANSI Z89.2–71 Safety Requirements for Industrial Protective Helmets for Electrical Workers, Class B
1910.268
American Petroleum Institute
1220 L Street, NW., Washington, DC 20005–4070; Telephone: (202)682–8000
API 12A (Sept. 1951) Specification for Oil Storage Tanks With Riveted Shells, 7th Ed
1910.106
API 12B (May 1958) Specification for Bolted Production Tanks, 11th Ed., With Supplement No. 1, Mar. 1962
1910.106
API 12D (Aug. 1957) Specification for Large Welded Production Tanks, 7th Ed
1910.106
API 12F (Mar. 1961) Specification for Small Welded Production Tanks, 5th Ed
1910.106
API 620, Fourth Ed. (1970) Including Appendix R, Recommended Rules for Design and Construction of Large Welded Low Pressure Storage Tanks
1910.103; 1910.106; 1910.111
API 650 (1966) Welded Steel Tanks for Oil Storage, 3rd Ed
1910.106
API 1104 (1968) Standard for Welding Pipelines and Related Facilities
1910.252
API 2000 (1968) Venting Atmospheric and Low Pressure Storage Tanks
1910.106
API 2201 (1963) Welding or Hot Tapping on Equipment Containing Flammables
1910.252
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Order inquiries: 22 Law Drive, P.O. Box 2900, Fairfield, New Jersey 07007; Phone: 1-800-843-2763
ASME Boiler and Pressure Vessel Code, Sec. VIII, 1949, 1950, 1952, 1956, 1959, and 1962 Ed
1910.110; 1910.111
ASME Code for Pressure Vessels, 1968 Ed
1910.106; 1910.217
ASME Boiler and Pressure Vessel Code, Sec. VIII, 1968
1910.103; 1910.104; 1910.106; 1910.107; 1910.110; 1910.111; 1910.169
ASME Boiler and Pressure Vessel Code, Sec. VIII, Paragraph UG–84, 1968
1910.104
ASME Boiler and Pressure Vessel Code, Sec. VIII, Unfired Pressure Vessels, Including Addenda (1969)
1910.261; 1910.262; 1910.263
Code for Unfired Pressure Vessels for Petroleum Liquids and Gases of the API and the ASME, 1951 Ed
1910.110
ASME B56.6–1992 (with addenda), Safety Standard for Rough Terrain Forklift Trucks
1910.266
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959; Telephone: (610) 832–9585, FAX: (610) 832–9555
ASTM A 47–68 Malleable Iron Castings
1910.111
ASTM A 53–69 Welded and Seamless Steel Pipe
1910.110; 1910.111
ASTM A 126–66 Gray Iron Casting for Valves, Flanges and Pipe Fitting
1910.111
ASTM A 391–65 (ANSI G61.1–1968) Alloy Steel Chain
1910.184
ASTM A 395–68 Ductile Iron for Use at Elevated Temperatures
1910.111
ASTM B 88–69 Seamless Copper Water Tube
1910.110
ASTM B 88–66A Seamless Copper Water Tube
1910.252
ASTM B 117–64 Salt Spray (Fog) Test
1910.268
ASTM B 210–68 Aluminum-Alloy Drawn Seamless Tubes
1910.110
ASTM B 241–69 Standard Specification for Aluminum—Alloy Seamless Pipe and Seamless Extruded Tube
1910.110(b)(8)(i)
ASTM D 5–65 Test for Penetration by Bituminous Materials
1910.106
ASTM D 56–70 Test for Flash Point by Tag Closed Tester
1910.106
ASTM D 86–62 Test for Distillation of Petroleum Products
1910.106
ASTM D 88–56 Test for Saybolt Viscosity
1910.106
ASTM D 93–71 Test for Flash Point by Pensky Martens
1910.106
ASTM D 323–68 Standard Method of Test for Vapor Pressure of Petroleum Products (Reid Method)
1910.106(a)(30)
ASTM D 445–65 Test for Viscosity of Transparent and Opaque Liquids
1910.106
ASTM D 1692–68 Test for Flammability of Plastic Sheeting and Cellular Plastics
1910.103
ASTM D 2161–66 Conversion Tables For SUS
1910.106
American Welding Society
550 N.W. LeJeune Road, Miami, FL 33126
AWS A3.0 (1969) Terms and Definitions
1910.251
AWS A6.1 (1966) Recommended Safe Practices for Gas Shielded Arc Welding
1910.254
AWS B3.0–41 Standard Qualification Procedure
1910.67
AWS D1.0–1966 Code for Welding in Building Construction
1910.27
AWS D2.0–69 Specifications for Welding Highway and Railway Bridges
1910.67
AWS D8.4–61 Recommended Practices for Automotive Welding Design
1910.67
AWS D10.9–69 Standard Qualification of Welding Procedures and Welders for Piping and Tubing
1910.67
Commerce, Department of
National Technical Information Service, 5285 Port Royal Rd., Springfield, VA 22161
Commercial Standard, CS 202–56 (1961) “Industrial Lifts and Hinged Loading Ramps”
1910.30
Pub., “Model Performance Criteria for Structural Fire Fighters’ Helmets”
1910.156
Compressed Gas Association
1235 Jefferson Davis Highway, Arlington, VA 22202
CGA C–6 (1968) Standards for Visual Inspection of Compressed Gas Cylinders
1910.101
CGA C–8 (1962) Standard for Requalification of ICC–3HT Cylinders
1910.101
CGA G–1 (1966) Acetylene
1910.102
CGA G–1.3 (1959) Acetylene Transmission for Chemical Synthesis
1910.102
CGA G–1.4 (1966) Standard for Acetylene Cylinder Charging Plants
1910.102
CGA G–7.1 (1966) Commodity Specification
1910.134
CGA G–8.1 (1964) Standard for the Installation of Nitrous Oxide Systems at Consumer Sites
1910.105
CGA P–1 (1965) Safe Handling of Compressed Gases
1910.101
CGA P–3 (1963) Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate
1910.109
CGA S–1.1 (1963) and 1965 Addenda. Safety Release Device Standards—Cylinders for Compressed Gases
1910.101; 1910.103
CGA S–1.2 (1963) Safety Release Device Standards, Cargo and Portable Tanks for Compressed Gases
1910.101; 1910.103
CGA S–1.3 (1959) Safety Release Device Standards—Compressed Gas Storage Containers
1910.103; 1910.104; 1910.111
CGA 1957 Standard Hose Connection Standard
1910.253
CGA and RMA (Rubber Manufacturer's Association) Specification for Rubber Welding Hose (1958)
1910.253
CGA 1958 Regulator Connection Standard
1910.253
Crane Manufacturer's Association of America, Inc.
1 Thomas Circle, NW., Washington, DC 20005
CMAA Specification #61, Specifications for Electric Overhead Traveling Cranes
1910.179
General Services Administration
GSA Pub. GG–B–0067b, Air Compressed for Breathing Purposes, or Interim Federal Specifications, Apr. 1965
1910.134
Health and Human Services, Department of
Publication No. 76–120 (1975), List of Personal Hearing Protectors and Attenuation Data
1910.95
Institute of Makers of Explosives
420 Lexington Avenue, New York, NY 10017
IME Pamphlet No. 17, 1960, Safety in the Handling and Use of Explosives
1910.261
National Electrical Manufacturer's Association
1300 North 17th Street, Suite 1847, Rosslyn, VA 22209; Telephone: (703) 841–3200; FAX: (703) 841–3300
NEMA EW–1 (1962) Requirements for Electric Arc Welding Apparatus
1910.254
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 02269–9101, Telephone: (800) 344–3555
NFPA 30 (1969) Flammable and Combustible Liquids Code
1910.178
NFPA 32–1970 Standard for Dry Cleaning Plants
1910.106
NFPA 33–1969 Standard for Spray Finishing Using Flammable and Combustible Material
1910.94
NFPA 34–1966 Standard for Dip Tanks Containing Flammable or Combustible Liquids
1910.94
NFPA 34–1995 Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids
1910.6; 1910.124(b)(4)(ii)
NFPA 34–1996 Standard for Dip Tanks Containing Flammable or Combustible Liquids
1910.6(q)(4); 1910.124(b)(4)(iv)
NFPA 35–1970 Standard for the Manufacture of Organic Coatings
1910.106
NFPA 36–1967 Standard for Solvent Extraction Plants
1910.106
NFPA 37–1970 Standard for the Installation and Use of Stationery Combustion Engines and Gas Turbines
1910.106; 1910.110
NFPA 51B–1962 Standard for Fire Protection in Use of Cutting and Welding Processes
1910.252
NFPA 54–1969 Standard for the Installation of Gas Appliances and Gas Piping
1910.110
NFPA 54A–69 Standard for the Installation of Gas Piping and Gas Equipment on Industrial Premises and Certain Other Premises
1910.110
NFPA 58–1969 Standard for the Storage and Handling of Liquefied Petroleum Gases (ANSI Z106.1–1970)
1910.110; 1910.178
NFPA 59–1968 Standard for the Storage and Handling of Liquefied Petroleum Gases at Utility Gas Plants
1910.110
NFPA 62–1967 Standard for the Prevention of Dust Explosions in the Production, Packaging, and Handling of Pulverized Sugar and Cocoa
1910.263
NFPA 68–1954 Guide for Explosion Venting
1910.94
NFPA 70–1971 National Electrical Code
1910.66
NFPA 78–1968 Lightning Protection Code
1910.109
NFPA 80–1968 Standard for Fire Doors and Windows
1910.106
NFPA 80–1970 Standard for the Installation of Fire Doors and Windows
1910.253
NFPA 86A–1969 Standard for Oven and Furnaces Design, Location and Equipment
1910.107; 1910.108
NFPA 91–1961 Standard for the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying (ANSI Z33.1–61)
1910.107
NFPA 91–1969 Standards for Blower and Exhaust Systems
1910.108
NFPA 96–1970 Standard for the Installation of Equipment for the Removal of Smoke and Grease Laden Vapors from Commercial Cooking Equipment
1910.110
NFPA 101–1070 Code for Life Safety From Fire in Buildings and Structures
1910.261
NFPA 203M–1970 Manual on Roof Coverings
1910.109
NFPA 251–1969 Standard Methods of Fire Tests of Building Construction and Materials
1910.106
NFPA 302–1968 Fire Protection Standard for Motor–Craft (Pleasure and Commercial)
1910.265
NFPA 385–1966 Recommended Regulatory Standard for Tank Vehicles for Flammable and Combustible Liquids
1910.106
NFPA 496–1967 Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations
1910.103
NFPA 505–1969 Standard for Type Designations, Areas of Use, Maintenence, and Operation of Powered Industrial Trucks
1910.110
NFPA 566–1965 Standard for the Installation of Bulk Oxygen Systems at Consumer Sites
1910.253
NFPA 656–1959 Code for the Prevention of Dust Ignition in Spice Grinding Plants
1910.263
NFPA 1971–1975 Protective Clothing for Structural Fire Fighting
1910.156
National Food Plant Institute
1700 K Street, NW., Washington, DC 20006
Definition and Test Procedures for Ammonium Nitrate Fertilizer (Nov. 1964)
1910.109
National Institute for Occupational Safety and Health
NIOSH Publications, 4676 Columbia Parkway, Mail Stop C–13, Cincinnati, OH 45226–1998; Telephone: (800) 356–4674
Registry of Toxic Effects of Chemical Substances, 1978
1910.20
Development of Criteria for Fire Fighters Gloves; Vol. II, Part II; Test Methods, 1976
1910.156
NIOSH Recommendations for Occupational Safety and Health Standards (September 1987)
1910.120
Society of Automotive Engineers
400 Commonwealth Dr., Warrendale, PA 15096–0001; Telephone: (412) 776–4841
SAE J185, June 1988, Recommended Practice for Access Systems for Off-Road Machines
1910.266
SAE J231, January 1981, Minimum Performance Criteria for Falling Object Protective Structure (FOPS)
1910.266
SAE J386, June 1985, Operator Restraint Systems for Off-Road Work Machines
1910.266
SAE J397, April 1988, Deflection Limiting Volume—ROPS/FOPS Laboratory Evaluation
1920.266
SAE 765 (1961) SAE Recommended Practice: Crane Loading Stability Test Code
1910.180
SAE J1040, April 1988, Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines
1920.266
The Fertilizer Institute
1015 18th. Street, NW., Washington, DC 20036
Standard M–1 (1953, 1955, 1957, 1960, 1961, 1963, 1965, 1966, 1967, 1968), Superseded by ANSI K61.1–1972
1910.111
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112; Telephone: (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105; Telephone: (800) 854–7179
UL 58–61 Steel Underground Tanks for Flammable and Combustible Liquids, 5th Ed
1910.106
UL 80–63 Steel Inside Tanks for Oil-Burner Fuel
1910.106
UL 142–68 Steel Above Ground Tanks for Flammable and Combustible Liquids
1910.106
United States Public Health Service
Available from: United States Pharmacopeia Convention, 2601 Twinbrook Parkway, Rockville, MD 20852
U.S. Pharmacopeia
1910.134
Publication No. 934 (1962), Food Service Sanitation Ordinance and Code, Part V of the Food Service Sanitation Manual
1910.142
Addresses
Technical Data Center: Frances Perkins Department of Labor Building, Room N2625, 200 Constitution Ave., NW., Washington, DC 20210.
Boston Regional Office—Region I: Regional Administrator, U.S. Department of Labor—OSHA, JFK Federal Bldg., Rm. E–340, Boston, MA 02203.
New York Regional Office—Region II: Regional Administrator, U.S. Department of Labor—OSHA, 201 Varick St., Room 670, New York, NY 10014.
Philadelphia Regional Office—Region III: Regional Administrator, U.S. Department of Labor—OSHA, Gateway Bldg., Suite 2100, 3535 Market St., Philadelphia, PA 19104.
Atlanta Regional Office—Region IV: Regional Administrator, U.S. Department of Labor—OSHA, 1375 Peachtree St., NE., Suite 587, Atlanta, GA 30367.
Chicago Regional Office—Region V: Regional Administrator, U.S. Department of Labor—OSHA, 32nd Fl., Room 3244, 230 S. Dearborn St., Chicago, IL 60604.
Dallas Regional Office—Region VI: Regional Administrator, U.S. Department of Labor—OSHA, 555 Griffin St., Room 602, Dallas, TX 75202.
Kansas City Regional Office—Region VII: Regional Administrator, U.S. Department of Labor—OSHA, 1100 Main St., Kansas City, MO 64106.
Denver Regional Office—Region VIII: Regional Administrator, U.S. Department of Labor—OSHA, 1999 Broadway, Suite 1690, Denver, CO 80202–5716.
San Francisco Regional Office—Region IX: Regional Administrator, U.S. Department of Labor—OSHA, 71 Stevenson St., Suite 420, San Francisco, CA 94105.
Seattle Regional Office—Region X: Regional Administrator, U.S. Department of Labor—OSHA, 1111 Third Avenue, Suite 715, Seattle, WA 98101–3212.


Note: Addresses of standards organizations are also listed at 29 CFR 1910.6.

Need assistance?