e-CFR banner

Home
gpo.gov
govinfo.gov

e-CFR Navigation Aids

Browse

Simple Search

Advanced Search

 — Boolean

 — Proximity

 

Search History

Search Tips

Corrections

Latest Updates

User Info

FAQs

Agency List

Incorporation By Reference

eCFR logo

Related Resources

 

Electronic Code of Federal Regulations

Title 10—Energy
Material Approved for Incorporation by Reference

The Director of the Federal Register has approved, under 5 U.S.C. 552(a) and 1 CFR part 51, the incorporation by reference of the following publications. Incorporations by reference found within a regulation are effective upon the effective date of that regulation. For more information on incorporation by reference, see http://www.archives.gov/federal-register/cfr/ibr-locations.html.

10 CFR (PARTS 200–499)
DEPARTMENT OF ENERGY
10 CFR
PART 300—VOLUNTARY GREENHOUSE GAS REPORTING PROGRAM: GENERAL GUIDELINES
US Department of Energy, Office of Policy and International Affairs
1000 Independence Avenue, SW; Washington, DC 20585
Technical Guidelines for the Voluntary Reporting of Greenhouse Gases Program, January 2007
300.1, 300.5, 300.6, 300.8, 300.9, 300.12, 300.13
PART 420—STATE ENERGY PROGRAM
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
More information regarding the standards in this reference can be obtained from the following sources:
Environmental Protection Agency, 401 M Street, NW, Washington, DC 20006; (202) 554–1080
National Institute of Standards and Technology, U.S. Department of Commerce, Gaithersburg, MD 20899, (301) 975–8295
Weatherization Assistance Programs Division, Conservation and Renewable Energy, Mail Stop 5G–023, Forrestal Bldg., 1000 Independence Ave, SW, Washington, DC 20585; (202) 586–2207
Standard 90, Energy Conservation in New Building Design, Sections 4–9 (Aug. 11, 1975)
420.2; 420.7
ASHRAE/IESNA 90.1–1989, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings, including Addenda 90.16–1992, 90.1d–1992, 90.1e–1992. 90.1g–1993, 90.1i–1993
420.2; 420.6; 420.15
Council of American Building Officials
5203 Leesburg Pike, Falls Church, VA 22041
Model Energy Code, 1993, including Errata
420.2; 420.6; 420.15
PART 430—ENERGY CONSERVATION PROGRAM for CONSUMER PRUDUCTS
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
ARI Standard 210/240–2003, Unitary Air–Conditioning and Air–Source Heat Pump Equipment
430.22; Part 430, Appendix M, Subpart B, Sections 1.3, 2.2, 2.6, 2.7, 3.1.3
ARI 280–74 Standard for Central Forced–Air Electric Heating Equipment
Part 430, Subpart B, Appendix N
ARI Standard 1200–2006 Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
431.64; 431.66
American Association of Textile Chemists and Colorists (AATCC)
P.O. Box 1215, Research Triangle Park, NC 27709 PHONE: 919-549-8141
AATCC Test Method 79-2000, Absorbency of Bleached Textiles
Part 430, Appendix J1 to Subpart B, 2.6.4.5.2
AATCC Test Method 118-1997, Oil Repellency Hydrocarbon Resistance Test
Part 430, Appendix J1 to Subpart B, 2.6.4.5.1
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI B38.1–1970 Method of Testing for Household Refrigerators, Combination Refrigerator Freezers and Household Freezers
Part 430, Subpart B, Appendix A and B
ANSI B149.1–1972 Dehumidifiers
Part 430, Subpart B, Appendix L
ANSI C16.13–1961 Monochrome Television Broadcast Receivers
Part 430, Subpart B, Appendix H
ANSI C78.1–1991, For Fluorescent Lamps—Rapid–Start Types—Dimensional and Electrical Characteristics
430.2; 430.22
ANSI C78.2–1991, For Fluorescent Lamps—Preheat–Start Types—Dimensional and Electrical Characteristics
430.2; 430.22
ANSI C78.3–1991, For Fluorescent Lamps—Instant–Start and Cold–Cathode Types—Dimensional and Electrical Characteristics
430.2; 430.22
ANSI C78.21–1989, Incandescent Lamps – PAR and R Shapes
430.22
ANSI C78.375–1991, For Fluorescent Lamps—Guide for Electrical Measurements
430.2; 430.22
ANSI C79.1–1994, Nomenclature for Glass Bulbs—Intended for Use with Electric Lamps
430.22
ANSI C82.2–1984 Flourescent Lamp Ballasts—Methods of Measurements, approved Oct. 21, 1983
Part 430, Appendix Q
ANSI C82.3—1983, For Reference Ballasts for Fluorescent Lamps
430.2; 430.22
ANSI C82.6—2005, American National Standard for Lamp Ballasts—Ballasts for High-Intensity Dishcharge Lamps—Methods of Measurement (Proposed Revision of ANSI C82.6—1985)
431.324(b); 431.324(b)
ANSI Z11.182–1965 (R 1971), Standard Method of Test for Smoke Density in the Flue Gases from Distillate Fuels (ASTM D 2156–65 (1975))
Part 430, Subpart B, Appendix N and O
ANSI Z21.10.1–1975 Gas Water Heaters
Part 430, Subpart B, Appendix E
ANSI Z21.11.1–1974 ANS for Gas–Fired Room Heaters, Vol. 1, Vented Room Heaters
Part 430, Subpart B, Appendix O
ANSI Z21.13–1974 ANS for Gas–Fired Low Pressure Steam and Hot Water Heating Boilers
Part 430, Subpart B, Appendix N
ANSI Z21.44–1973 Gas Fired Gravity and Fan Type Direct Vent Wall Furnaces
Part 430, Subpart B, Appendix O
ANSI Z21.48–1976 Gas Fired Gravity and Fan Type Floor Furnaces
Part 430, Subpart B, Appendix O
ANSI Z21.49–1975 Gas Fired Gravity and Fan Type Vented Wall Furnace
Part 430, Subpart B, Appendix O
ANSI Z21.56–1994, Gas–Fired Pool Heaters
430.22
ANSI Z91.1–1972 ANS Performance Requirements for Oil–Powered Central Furnaces
Part 430, Subpart B, Appendix N
ANSI Z224.1–1971 Performance Evaluation Procedures for Household Washers (AHAM HLW–1, Dec. 1971)
Part 430, Subpart B, Appendix J
ANSI Z234.1–1972 Room Air Conditioners
Part 430, Subpart B, Appendix F
ANSI Z235.1–1972 Appliance Humidifier Standard (AHAM HU–1–72)
Part 430, Subpart B, Appendix K2
ANSI/AHAM DW–1–1992, American National Standard, Household Electric Dishwashers
430.22(b)(7); 430 Appendix C, Subpart B, Section 1.2; 430 Appendix C, Subpart B, Section 1.8; 430 Subpart C, Section 430.32(f)
ANSI/AMCA 210-99 (ASHRAE Standard 51-99), Laboratory Methods of Testing Fans for Aerodynamic Performance Rating
430.22; Part 430, Appendix M, Subpart B, sections 1.11, 2.5.3, 2.6
ANSI/ASHRAE Standard 23ndash;1993, Method of Testing for Rating Positive Displacement Refrigerant Compressors and Condensing Units
430.22; Part 430, Appendix M, Subpart B, sections 1.5, 3.11.2
ANSI/ASHRAE Standard 37–88 Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment
430.22; Part 430, Appendix M, Subpart B, Sections 1.6, 2.1, 2.2, 2.2.5, 2.4.1, 2.4.2, 2.5, 2.5.3, 2.6, 2.10.2, 2.10.3, 2.11, 2.13, 3.1.1, 3.1.5, 3.1.6, 3.3, 3.7, 3.9, 3.11.2, 3.11.3, 3.11.1.3
ANSI/ASHRAE 41.1–1986 (reaffirmed 2001), Standard Method for Temperature Measurement
430.22; Part 430, Appendix M, Subpart B, sections 1.7, 2.5, 2.5.4.2, 2.5.5, 2.5.6, 2.11
ANSI/ASHRAE 41.2–1987 (reaffirmed 1992), Standard Methods for Laboratory Airflow Measurement
430.22; Part 430, Appendix M, Subpart B, sections 1.8, 2.5.4.2, 2.6
ANSI/ASHRAE 41.6–1994 (reaffirmed 2001), Standard Method for Measurement of Moist Air Properties
430.22; Part 430, Appendix M, Subpart B, sections 1.9, 2.5.6
ANSI/ASHRAE 41.9–2000, Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
430.22; Part 430, Appendix M, Subpart B, sections 1.10, 3.11.2
ANSI/ASHRAE 116–1995, Methods of Testing for Rating Seasonal Efficiency of Unitary Air Conditioners and Heat Pumps
430.22; Part 430, Appendix M, Subpart B, Sections 1.12, 2.6
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
ASHRAE Standard 16–69 Method of Testing for Rating Room Air Conditioners
Part 430, Subpart B, Appendix F
ASHRAE 103–1993, Methods of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers (with Errata of October 24, 1996) except for Sections 3.0, second paragraph of section 7.2.2.2, 7.2.2.5, 8.6.1.1, 9.1.2.2, 9.5.1.1, 9.5.1.2.1, 9.5.1.2.2, 9.5.2.1, 9.7.1, 10.0, 11.2.12, 11.3.12, 11.4.12, 11.5.12, and Appendices B and C
Part 430, Subpart B, Appendix N
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME/ANSI Standard A112.18.1M–1996, Plumbing Fixture Fittings
430.22(b)(6)
ASME/ANSI Standard A112.19.6–1995, Hydraulic Requirements for Water Closets and Urinals
430.22(b)(6)
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585
ASTM D 396–78 Standard Specification for Fuel Oils
430.2
ASTM D 2156–65 (1975) Method of Test for Smoke Density in Flue Gases from Distillate Fuels (ANSI Z 11.182–1965 (R 1971))
Part 430, Subpart B, Appendix N and O
Association of Home Appliance Manufacturers
1111 19th Street, NW, Suite 402, Washington, DC 20036 PHONE: 202-872-5955
AHAM HLD–1, June 1974 Performance Evaluation Procedure for Household Tumble Type Clothes Dryers
Part 430, Subpart B, Appendix O
AHAM HLD–2EC, Dec. 1975 Test Method for Measuring Energy Consumption of Household Tumble Type Clothes Dryers
Part 430, Subpart B, Appendix D
AHAM HLW–2EC, Dec. 1975 Test Method for Measuring Energy Consumption of Household Clothes Washers
Part 430, Subpart B, Appendix J
AHAM HLW–1, Dec. 1971 Household Washer Performance Evaluation Procedure. (ANSI Z 224.1–1971)
Part 430, Subpart B, Appendix J
AHAM HRF–2–ECFT–1975 Test Procedures to Determine the Temperature and Energy Consumption of Household Refrigerators, Combination Refrigerator–Freezers, and Freezers
Part 430, Subpart B, Appendix A and B
AHAM HU–1–72, Appliance Humidifier Standard (ANSI Z 235.1–1972)
Part 430, Subpart B, Appendix K2
ANSI/AHAM DW–1–1992, American National Standard Household Electric Dishwashers
430.22(b)(7); 430 Subpart B, Appendix C, Section 1.2, Sections 1.8 through 1.11; Section 1.13; Section 2.6.3.1(A); Section 2.6.3.1(B); Section 2.6.3.2(A); Section 2.6.3.2(B); Section 2.6.3.3(A); Section 2.6.3.3(B); Section 2.8; 430 Subpart C, Section 430.32 (f)
California Energy Commission
1516 Ninth Street, MS-25, Sacramento, California 95814
CEC Test Method for Calculating the Energy Efficiency of Single-Voltage External AC-DC AC-AC Power Supplies, August 11, 2004
430.22; Part 430, Subpart B, Appendix Z, sections 3 and 4
U.S. Department of Energy
1000 Independence Avenue SW, Forrestal Building, Washington DC, 20585
Energy Star Program Requirements for Compact Fluorescent Lamps, August 9, 2001
430.22; Part 430, Subpart B, Appendix W
Energy Star Program Requirements for [Compact Fluorescent Lamps] CFLs, October 30, 2003, Version 3.0
430.22; Part 430, Subpart B, Appendix V, Sections 3(a) and 4(a)
Energy Star Program Requirements for Dehumidifiers, January 2001
430.22; Part 430, Subpart B, Appendix X, Sections 3 and 4
Energy Star Program Requirements for Residential Light Fixtures, Version 4.0, January 2005
430.22; Part 430, Subpart B, Appendix V, Sections 3 and 4
Energy Star Testing Facility Guidance Manual: Building a Testing Facility and Performing the Solid State Test Method for ENERGY STAR Qualified Ceiling Fans, Version 1.1, December 2002
430.22; Part 430, Subpart B, Appendix U, Sections 3 and 4
Test Methodology for Determining the Energy Performance of Battery Charging Systems, December 2005
430.22; Part 430, Subpart B, Appendix Y, Sections 3 and 4
Hydronics Institute Division of GAMA
P.O. Box 218, Berkeley Heights, NJ 07922
Testing and Rating Standards for Cast Iron and Steel Heating Boilers, Jan. 1977
Part 430, Subpart B, Appendix N
Illuminating Engineering Society of North America, Publications Department
345 E. 47th Street, New York, NY 10017, (212) 705–7925
Illuminating Engineering Society of North America Lighting Handbook, Reference and Application, 8th Edition, 1993, Chapter 6, Light Sources
430.22
IES LM–9–88, IES Approved Method for the Electrical and Photometric Measurements of Fluorescent Lamps
430.22, Subpart B, Appendix R
IES, LM–16, –84, IES Pratical Guide to Colorimetry of Light Sources
430.22, Subpart B, Appendix R
IESNA LM–16–1993m IESNA Practical Guide to Colorimetry of Light Sources
430.22
IES LM–20–1982, IES Approved Method for Photometric Measuring and Reporting Tests on Reflector Type Lamps
430.22, Subpart B, Appendix R
IESNA LM–20–1994, IESNA Approved Method for Photometric Testing of Reflector–Type Lamps
430.22
IES LM–45–91, IES Approved Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps
430.22, Subpart B, Appendix R
IES LM–58–83, IES Guide to Spectroradiometric Measurements
430.22, Subpart B, Appendix R
IESNA LM–58–1994, IESNA Guide to Spectroradiometric Measurements
430.22
IES LM–66–1991, IES Approved Method for the Electrical and Photometric Merasurements of Single–Ended Compact Fluorescent Lamps
430.22, Subpart B, Appendix R
International Commission on Illumination
Bureau Central De La CIE, 4 AV. Du Recteur–Poincare, 75 782 Paris, Cedex 16, France
International Commission on Illumination Publication No. 13.2, 1974, corrected reprint 1993, Method of Measuring and Specifying Color Rendering Properties of Light Sources, ISBN 3 900 734 39 9
430.22, Subpart B, Appendix R
International Electrotechnical Commission
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
IEC Standard 705, Methods for Measuring the Performance of Microwave Ovens for Household and Similar Purposes, Section 4, Methods of Measurement, Paragraph 13 Electrical Power Input Measurement and Paragraph 14 Efficiency (1988)
430.22
IEC Standard 705, Amendment 2, Methods for Measuring the Performance of Microwave Ovens for Household and Similar Purposes, Section 4, Methods of Measurement, Paragraph 12 Microwave Power Output Measurement (1993)
430.22
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
UL 729–1976 Standard for Safety: Oil-Fired Floor Furnaces
Part 430, Subpart B, Appendix O
UL 730–1974 Standard for Safety: Oil-Fired Wall Furnaces
Part 430, Subpart B, Appendix O
UL 896–1973 Standard for Safety: Oil-Burning Stoves
Part 430, Subpart B, Appendix O
PART 431—ENERGY EFFICIENCY PROGRAM for CERTAIN COMMERCIAL and INDUSTRIAL EQUIPMENT
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816; Internet: http://www.ari.org/std/standards.html
ARI Standard 210/240–2003, Unitary Air–Conditioning and Air–Source Heat Pump Equipment
431.95; 431.96(b)
ARI 310/380–2004, CSA-C744-04: Standard for Packaged Terminal Air–Conditioners and Heat Pumps
431.95; 431.96(b)
ARI Standard 340/360–2004, Performance Rating of Commercial and Industrial Unitary Air–Conditioning and Heat Pump Equipment
431.95, 431.96(b)
ARI 810–2003, Performance Rating of Automatic Commercial Ice Makers
431.133, 431.134
ARI 1200–2006, Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets
431.63, 431.64
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI Z21.10.3–1998/CSA 4.3-M98, Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous
431.105
ANSI Z21.10.3a–2000/CSA 4.3a-M00, Addenda to Z21.10.3-1998/CSA 4.3-M98: Standard for Gas Water Heaters, Volume III, Storage Water Heaters, with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous
431.105
ANSI Z21.47–1998 Gas-Fired Central Furnaces
431.75; 431.76
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585
ASTM F 2324–03 Standard Test Method for Prerinse Spray Valves
431.263; 431.264
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
ANSI/ASHRAE Standard 29–1988 (Reaffirmed 2005) Methods of Testing Automatic Ice Makers
431.64; 431.134
ANSI/ASHRAE Standard 32.1–2004 Methods of Testing for Rating Vending Machines for Bottled, Canned, and Other Sealed Beverages
431.293; 431.294
ASHRAE Standard 103–1993 Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers
431.75; 431.76
American Society of Mechanical Engineers (ASME)
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME PTC 4.1: Power Test Codes for Steam-Generating Units, 1964, reaffirmed 1991 (including 1968 and 1969 addenda)
431.85; 431.86
Association of Home Appliance Manufacturers
1111 19th Street NW, Suite 402, Washington DC 20036
ANSI–AHAM HRF-1-2004: Energy, Performance and Capacity of Household Refrigerators, Refrigerator-Freezers, and Freezers
431.64; 431.294
CSA International
5060 Spectrum Way, Mississauga, Ontario, Canada L4W5N6
CSA Standard C390-93: Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1)
Part 431, Subpart B, Appendix B; 431.12; 431.15; 431.19; 431.20
U.S. Environmental Protection Agency
Ariel Rios Building, 1200 Pennsylvania Avenue NW, Washington DC 20460
Energy Star Program Requirements for Exit Signs, Version 2.0, 2001
431.203; 431.204
Energy Star Program Requirements for Traffic Signals, 2003, Version 1.1
431.223; 431.224
Hydronics Institute Division of GAMA
P.O. Box 218, Berkeley Heights, NJ 07922
HI BTS-2000, Hydronics Institute (HI) Division of GAMA Boiler Testing Standard BTS-2000, “Method to Determine Efficiency of Commercial Space Heating Boilers,” published January 2001
431.75; 431.76; 431.85; 431.86
Institute of Electrical and Electronics Engineers
445 Hoes Lane, P.O. Box 1331, Piscataway, New Jersey 08855-1331
IEEE Standard 112, Standard Test Procedure for Polyphase Induction Motors and Generators, 1996
Part 431, Subpart B, Appendix B; 431.12; 431.15; 431.19; 431.20
Institute of Transportation Engineers (ITE)
1099 14th Street NW, Suite 300 West, Washington DC 20005-3438
Institute of Transportation Engineers Vehicle Traffic Control Signal Heads: Light Emitting Diode (LED) Circular Signal Supplement , June 27, 2005
431.224
International Electrotechnical Commission
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
IEC Standard 60034-1 with Amendment 1, Rotating Electrical Machines, Part 1: Rating and Performance, dated 1996, with Amendment 1, dated 1997
431.12; 431.15
IEC Standard 60034-12, Rotating Electrical Machines, Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages Up to and Including 660V, with Amendment 1 (1992) and Amendment 2 (1995)
431.12; 431.15
IEC Standard 60050-411, International Electrotechnical Vocabulary, Chapter 411: Rotating Machines, 1996
431.12; 431.15
IEC Standard 60072-1, Dimensions and Output Series for Rotating Electrical Machines—Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080, 1991
431.1; 431.12; 431.15
International Organization for Standardization (ISO)
International Organization for Standardization, Case Postale 56, CH-1211, Geneva 20, Switzerland. Also available from the American National Standards Institute, 25 West 43rd Street, New York, New York 10036
ISO 13256-1, Water-Source Heat Pumps—Testing and Rating for Performance—Part 1: Water-to-Air and Brine-to-Air Heat Pumps, 1998
431.95, 431.96(b)
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
MG1–1993 “Motors and Generators” Section I, Part 1, Paragraphs 1.16.1, 1.16.1.1, 1.17.1, 1.17.1.2, and 1.40.1; Part 4, Paragraph 4.01, and Figures 4–1, 4–2, 4–3, and 4–4; and Section II, Part 11, Paragraphs 11.01.2, 11.31 (except the lines for frames 447T, 447TS, 449T, and 449TS), 11.32, 11.34 (except the line for frames 447TC and 449TC, and the line for frames 447TSC and 449TSC), 11.35, and 11.36 (except the line for frames 447TD and 449TD, and the line for frames 447TSD and 449TSD; and Table 11–1; Part 12, Paragraphs 12.35.1, 12.35.5, 12.38.1, 12.39.1, 12.40.1, 12.58.1, and Tables 12–2 and 12–8; and Part 14, Paragraphs 14.02 and 14.03) with Revisions 1, 2, 3, and 4
431.22
MG1-1993, “Motors and Generators,” with Revisions 1,2,3 and 4
Part 431, Subpart B, Appendix B; 431.12; 431.15; 431.31
MG1–1993 “Motors and Generators” Section I, Part 1, Paragraphs 1.16.1, 1.16.1.1, 1.17.1.1, 1.17.1.2, and 1.40.1
431.12; 431.15
MG1–1993 “Motors and Generators” Section 1, Part 4, Paragraph 4.01, and Figures 4–1, 4–2, 4–3, and 4–4
431.12; 431.15
MG1–1993 “Motors and Generators” Section II, Part 11, Paragraphs 11.01.2, 11.31 (except the lines for frames 447T, 447TS, 449T, and 449TS), 11.32, 11.34 (except the line for frames 447TC and 449TC, and the line for frames 447TSC and 449TSC), 11.35, and 11.36 (except the line for frames 447TD and 449TD, and the line for frames 447TSD and 449TSD; and Table 11–1
431.12; 431.15
MG1–1993 “Motors and Generators” Section II, Part 12, Paragraphs 12.35.1, 12.35.5, 12.38.1, 12.39.1, 12.40.1, 12.58.1, and Tables 12–2 and 12–8
431.12; 431.15
MG1–1993 “Motors and Generators” Section II, Part 14, Paragraphs 14.02 and 14.03)
431.12; 431.15
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
U.L. 727-1994, Standard for Safety: Oil-Fired Central Furnaces
431.75; 431.76
PART 433—ENERGY EFFICIENCY STANDARDS for the DESIGN and CONSTRUCTION of NEW FEDERAL COMMERCIAL and MULTI-FAMILY HIGH-RISE RESIDENTIAL BUILDINGS
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI/ASHRAE/IESNA Standard 90.1: Energy Standard for Buildings except Low-Rise Residential Buildings, 2004
433.2; 433.3; 433.4(a); 433.5(a)
PART 434—ENERGY CODE for NEW FEDERAL COMMERCIAL and MULTI-FAMILY HIGH RISE RESIDENTIAL BUILDINGS
Air–Conditioning and Refrigeration Institute
4100 North Fairfax Drive, Suite 200, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
ARI Standard 210/240–94, Unitary Air–Conditioning and Air–Source Heat Pump Equipment, 1994
434.701
ARI 310/380–93, Packaged Terminal Air–Conditioners and Heat Pumps (1993 Edition)
434.701
ARI Standard 320–93, Water–Source Heat Pumps
434.701
ARI Standard 325–93, Ground Water–Source Heat Pumps
434.701
ARI Standard 330–93, Ground–Source Closed–Loop Heat Pumps
434.701
ARI Standard 340/360–93, Commercial and Industrial Unitary Air–Conditioning and Heat Pump Equipment (1993 Edition)
434.701
ARI Standard 365–94, Commercial and Industrial Unitary Air–Conditioning Condensing Units
434.701
ARI Standard 550–92, Centrifugal and Rotary Screw Water–Chilling Packages
434.701
ARI Standard 560–92, Absorption Water Chilling and Water Heating Packages
434.701
ARI Standard 590–92, Positive Displacement Compressor Water–Chilling Packages
434.701
American Architectural Manufacturers Association (AAMA)
1827 Walden Office Square, Suite 104, Schaumburg, IL 60173–4628
ANSI/AAMA/NWWDA 101/I.S.2–97, Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
434.701
American Gas Association
1515 Wilson Blvd., Arlington, VA 22209; (703) 841–8400
Z21.47-1993, Gas-Fired Central Furnaces, including addenda Z21.47a-1995
434.701
American National Standards Institute
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI Z21.10.3–1993, Gas Water Heaters, Volume III, Storage with Input Ratings above 75,000 Btu's per Hour, Circulating and Instantaneous Water Heaters
434.701
ANSI Z21.13–1991, including addenda Gas–Fired Low–Pressure Steam and Hot Water Boilers, Addenda Z21.13a–1993 and Z21–13b–1994
434.701
ANSI Z21.56–1994, Gas–Fired Pool Heaters; including Addenda Z21.56a–1996
434.701
ANSI Z21.66–1996, Automatic Vent Damper Devices for Use with Gas–Fired Appliances
434.701
ANSI Z83.8–96, Gas Unit Heater and Gas–Fired Duct Furnaces
434.701
ANSI Z83.9–90, including addenda Z83.9a–1992, Gas–Fired Duct Furnaces, 1990. (Addendum 90.1b)
434.701
ANSI/U.L. 726, Oil–Fired Boiler Assemblies (7th Edition, 1995)
434.701
ANSI/AHAM RAC–1–1992, Room Air Conditioners (1982 Edition)
434.701
American Society of Heating, Refrigerating and Air Conditioning Engineers, Inc.
1791 Tullie Circle, NE, Atlanta, Georgia 30329
More information regarding the standards in this reference can be obtained from the following sources:
Environmental Protection Agency, 401 M Street, NW, Washington, DC 20006; (202) 554–1080
National Institute of Standards and Technology, U.S. Department of Commerce, Gaithersburg, MD 20899, (301) 975–8295
Weatherization Assistance Programs Division, Conservation and Renewable Energy, Mail Stop 5G–023, Forrestal Bldg., 1000 Independence Ave, SW, Washington, DC 20585; (202) 586–2207
ANSI/ASHRAE 55–1992 including addenda 55a–1995, Thermal Environmental Conditions for Human Occupancy
434.701
ASHRAE Standard 62–1989, Ventilation for Acceptable Indoor Air Quality
434.701
ASHRAE/IESNA 90.1–1989, Energy Efficient Design of New Buildings Except Low-Rise Residential Buildings, including Addenda 90.16–1992, 90.1d–1992, 90.1e–1992. 90.1g–1993, 90.1i–1993; 90.1m–1995, 90.1n–1997
434.301.1; 434.402.1.2.4; 434.402.4.2; 434.403.2.1; 434.701
ASHRAE, Handbook, HVAC Applications (I–P Edition, 1995)
434.701
ASHRAE, Handbook, 1993 Fundamentals Volume
434.701
American Society for Testing and Materials (ASTM)
100 Barr Harbor Drive, West Conshohocken, PA 19428–2959, Telephone (610) 832–9585, FAX (610) 832–9555
ASTM C 177–85 (Reapproved 1993), Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded–Hot–Plate Apparatus
434.701
ASTM C 236–89 (Reapproved 1993), Test Method for Steady–State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box
434.701
ASTM C 518–91, Test Method for Steady–State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
434.701
ASTM C 976–90, Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box
434.701
ASTM D 4099–95, Standard Specification for Poly (Vinyl Chloride) (PVC) Prime Windows/Sliding Glass Doors
434.701
ASTM E 283–91, Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Difference Across the Specimen
434.701
Cooling Tower Institute
P.O. Box 73383, Houston, TX 77273
CTI Standard–201, Standard for the Certification of Water–Cooling Towers Thermal Performance, November 1996
434.701
Lund Institute of Technology
Lund, Sweden
Report TVAHB–3007, 1981, “Thermal Bridges in Sheet Metal Construction” by Gudni Johannesson
434.701
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
NEMA MG1-1993, “Motors and Generators,” Revision No. 1, December 7, 1993
434.701
NEMA MG 10-1994, Energy Management Guide for Selection and Use of Polyphase Motors
434.701
NEMA MG 11-1977 (Revised 1982, 1987), Energy Management Guide for Selection and Use of Single-Phase Motors
434.701
National Fenestration Rating Council, Inc.
1300 Spring Street, Suite 500, Silver Spring, MD 20910
NFRC 100-97, Procedure for Determining Fenestration Product Thermal Properties
434.701
NFRC 200 - Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (1995)
434.701
National Wood Window and Door Association (formerly the National Woodwork Manufacturers Association)
1400 East Toughy Avenue, Suite 470, Des Plaines, IL 60018
ANSI/AAMA/NWWDA 101/I.S.2–97, Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors
434.701
ANSI/NWWDA I.S.3-95, Wood Sliding Patio Doors
434.701
Sheet Metal and Air-Conditioning Contractors' National Association, Inc.
4201 Lafayette Center Drive, Chantilly, VA 20151
HVAC Duct Construction Standards--Metal and Flexible (2nd Edition, 1995)
434.701
HVAC Air Duct Leakage Test Manual (1st Edition, 1985)
434.701
Fibrous Glass Duct Construction Standards (6th Edition, 1992)
434.701
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
ANSI/UL 726, Oil–Fired Boiler Assemblies (7th Edition, 1995)
434.701
U.L. 727, including addendum dated January 30, 1996, Oil-Fired Central Furnaces (8th Edition, 1994)
434.701
UL 731, Oil–Fired Unit Heaters (5th Edition, 1995)
434.701
PART 435—ENERGY EFFICIENCY STANDARDS for NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS
International Code Council
4051 West Flossmoor Road, Country Club Hills, IL 60478-5795
ICC International Energy Conservation Code, 2004 Supplement Edition, January 2005
435.2; 435.3; 435.4(a); 435.5
PART 436—FEDERAL ENERGY MANAGEMENT and PLANNING PROGRAMS
Standard 93–77 Methods of Testing to Determine the Thermal Performance of Solar Collectors
436.76
PART 440—WEATHERIZATION ASSISTANCE for LOW-INCOME PERSONS
Air Conditioning and Refrigeration Institute
4301 North Fairfax Drive, Suite 425, Arlington, VA 22203; PHONE: 703-524-8800; FAX: 703-528-3816
ARI 210/240–1989
Part 440, Appendix A
ARI 470–1987
Part 440, Appendix A
American National Standards Institute/American Architectural Manufacturers Association
1540 East Dundee Road, Palatine, IL 60067; (708) 202–1350
ANSI/AAMA 101–88
Part 440, Appendix A
ANSI/AAMA 1002.10–83
Part 440, Appendix A
ANSI/AAMA 1102.7–89
Part 440, Appendix A
American Gas Association
1515 Wilson Blvd., Arlington, VA 22209; (703) 841–8400
AGA No. 1–80, Requirements for Heat Reclaimer Devices for Use with Gas-Fired Appliances, June 1, 1980
Part 440, Appendix A
American National Standards Institute, Inc.
25 West 43rd Street, Fourth floor, New York, NY 10036 Telephone: (212) 642–4900
ANSI Z21.8–1984
Part 440, Appendix A
ANSI Z21.17–1984, and Z21.17a–1990
Part 440, Appendix A
ANSI Z21.21–1987 and Z21.21a–1989
Part 440, Appendix A
ANSI Z21.47–1987, Z21.47a–1988 and Z21.47b–1989
Part 440, Appendix A
ANSI Z21.66–1988, including Exhibits A & B
Part 440, Appendix A
ANSI Z21.71–1981, Z21.71a1985 and Z21.71b–1989
Part 440, Appendix A
ANSI Z223.1–1988
Part 440, Appendix A
ANSI Z223.1–1988, including Appendix H
Part 440, Appendix A
ANSI Z223.1–1988, including Part 9 and Appendices G & H
Part 440, Appendix A
ANSI Z223.1–1988, including Appendices H, I, J and K
Part 440, Appendix A
ANSI/American Home Appliance Manufacturers ANSI/AHAM RAC–1–1982
Part 440, Appendix A
American National Standards Institute/National Wood Window and Door Association
1400 East Touhy Avenue, Suite 470, Des Plaines, IL 60018; (847) 299–5200
ANSI/NWWDA I.S. 1–87 Exterior door (provisions)
Part 440, Appendix A
ANSI/NWWDA I.S. 2–87
Part 440, Appendix A
ANSI/NWWDA I.S. 2–87 (Section 3)
Part 440, Appendix A
ANSI/NWWDA I.S. 3–83
Part 440, Appendix A
ANSI/NWWDA I.S. 6–86
Part 440, Appendix A
American National Standards Institute/Steel Door Institute
712 Lakewood Center North, 14600 Detroit Avenue, Cleveland, OH 44107; (216) 899–0100
ANSI/SDI 100–1985
Part 440, Appendix A
American Society for Testing and Materials
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, Telephone (610) 832-9585, FAX (610) 832-9555
National Standards Association
1200 Quince Orchard Blvd., Gaithersburg, MD 20878; (301) 590–2300. (NSA is a local contact for materials from ASTM)
ASTM C208–72 (1982)
Part 440, Appendix A
ASTM C509–84
Part 440, Appendix A
ASTM C516–80 (1990)
Part 440, Appendix A
ASTM C517–71 (1979)
Part 440, Appendix A
ASTM C533–85 (1990)
Part 440, Appendix A
ASTM C534–88
Part 440, Appendix A
ASTM C547–77
Part 440, Appendix A
ASTM C549–81 (1986)
Part 440, Appendix A
ASTM C552–88
Part 440, Appendix A
ASTM C553–70 (1977)
Part 440, Appendix A
ASTM C570–72 (1989)
Part 440, Appendix A
ASTM C578–87a
Part 440, Appendix A
ASTM C591–85
Part 440, Appendix A
ASTM C592–80
Part 440, Appendix A
ASTM C610–85
Part 440, Appendix A
ASTM C612–83
Part 440, Appendix A
ASTM C665–88
Part 440, Appendix A
ASTM C669–75 (1989)
Part 440, Appendix A
ASTM C720–89
Part 440, Appendix A
ASTM C726–88
Part 440, Appendix A
ASTM C728–89a
Part 440, Appendix A
ASTM C739–88
Part 440, Appendix A
ASTM C755–85 (1990)
Part 440, Appendix A
ASTM C764–88
Part 440, Appendix A
ASTM C834–76 (1986)
Part 440, Appendix A
ASTM C892–89
Part 440, Appendix A
ASTM C920–87
Part 440, Appendix A
ASTM C971–82
Part 440, Appendix A
ASTM C984–83
Part 440, Appendix A
ASTM D3678–88
Part 440, Appendix A
ASTM D4099–89
Part 440, Appendix A
ASTM E84–89a
Part 440, Appendix A
ASTM E96–90
Part 440, Appendix A
American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016–5990; Telephone: (800) THE–ASME
ASME Boiler and Pressure Vessel Code, 1992, Sections II, V, VIII, IX, and X
Part 440, Appendix A
ASME CSD–1–1988
Part 440, Appendix A
Federal Specifications, General Services Administration
Specification Section, Room 6654, 7th and D Streets, SW, Washington, DC 20407; (202) 708–5082
FS HH–I–1972/1, August 12, 1981
Part 440, Appendix A
FS HH–I–1972/2, August 12, 1981 and Amendment 1, October 3, 1985
Part 440, Appendix A
FS HH–I–1972/4, August 12, 1981
Part 440, Appendix A
FS HH–I–558C, January 7, 1992
Part 440, Appendix A
FS TT–P–00791B, October 16, 1969 and Amendment 2, March 23, 1971
Part 440, Appendix A
FS TT–S–001657, October 8, 1970
Part 440, Appendix A
FS TT–S–00230C, February 2, 1970 and Amendment 2, October 9, 1970
Part 440, Appendix A
National Electrical Manufacturers Association
Global Engineering Documents, 15 Inverness Way East, Englewood, Colorado 80112-5776
NEMA DC3–1989
Part 440, Appendix A
National Fire Protection Association
1 Batterymarch Park, Quincy, MA 022697ndash;9101, Telephone: (800) 344-3555
NFPA 31–1987
Part 440, Appendix A
NFPA 58–1989
Part 440, Appendix A
NFPA 70–1993, National Electrical Code
Part 440, Appendix A
NFPA 211–1988
Part 440, Appendix A
Sheet Metal and Air Conditioning Contractors Association
P.O. Box 221230, Chantilly, VA 22022–1230; (703) 803–2980
SMACNA Energy Recovery Equipment and Systems, Air-to-Air (1978)
Part 440, Appendix A
Tubular Exchange Manufacturers Association
25 North Broadway, Tarrytown, NY 10591; (914) 332–0040
Standards of the Tubular Exchanger Manufactuers Association, Seventh Ed., 1988
Part 440, Appendix A
Underwriters Laboratories, Inc.
Available from: Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, Telephone (800) 854–7179 or
Global Engineering Documents, 7730 Carondelet Ave., Suite 470, Clayton, MO 63105, Telephone (800) 854–7179
UL 17, November 28, 1988
Part 440, Appendix A
UL 296, February 28, 1989
Part 440, Appendix A
UL 507, August 23, 1990
Part 440, Appendix A
UL 727, August 27, 1991
Part 440, Appendix A
UL 1995, November 30, 1990
Part 440, Appendix A

Need assistance?