Title 16

PART 1203

Part 1203 - Safety Standard For Bicycle Helmets

PART 1203 - SAFETY STANDARD FOR BICYCLE HELMETS Authority:15 U.S.C. 2056, 2058, and 6001-6006. Subpart B is also issued under 15 U.S.C. 2063. Subpart C is also issued under 15 U.S.C. 2065. Source:63 FR 11729, Mar. 10, 1998, unless otherwise noted.

16:2.0.1.2.43.1SUBPART A
Subpart A - The Standard
16:2.0.1.2.43.1.1.1SECTION 1203.1
   1203.1 Scope, general requirements, and effective date.
16:2.0.1.2.43.1.1.2SECTION 1203.2
   1203.2 Purpose and basis.
16:2.0.1.2.43.1.1.3SECTION 1203.3
   1203.3 Referenced documents.
16:2.0.1.2.43.1.1.4SECTION 1203.4
   1203.4 Definitions.
16:2.0.1.2.43.1.1.5SECTION 1203.5
   1203.5 Construction requirements - projections.
16:2.0.1.2.43.1.1.6SECTION 1203.6
   1203.6 Labeling and instructions.
16:2.0.1.2.43.1.1.7SECTION 1203.7
   1203.7 Samples for testing.
16:2.0.1.2.43.1.1.8SECTION 1203.8
   1203.8 Conditioning environments.
16:2.0.1.2.43.1.1.9SECTION 1203.9
   1203.9 Test headforms.
16:2.0.1.2.43.1.1.10SECTION 1203.10
   1203.10 Selecting the test headform.
16:2.0.1.2.43.1.1.11SECTION 1203.11
   1203.11 Marking the impact test line.
16:2.0.1.2.43.1.1.12SECTION 1203.12
   1203.12 Test requirements.
16:2.0.1.2.43.1.1.13SECTION 1203.13
   1203.13 Test schedule.
16:2.0.1.2.43.1.1.14SECTION 1203.14
   1203.14 Peripheral vision test.
16:2.0.1.2.43.1.1.15SECTION 1203.15
   1203.15 Positional stability test (roll-off resistance).
16:2.0.1.2.43.1.1.16SECTION 1203.16
   1203.16 Dynamic strength of retention system test.
16:2.0.1.2.43.1.1.17SECTION 1203.17
   1203.17 Impact attenuation test.
16:2.0.1.2.43.2SUBPART B
Subpart B - Certification
16:2.0.1.2.43.2.1.1SECTION 1203.30
   1203.30 Purpose, basis, and scope.
16:2.0.1.2.43.2.1.2SECTION 1203.31
   1203.31 Applicability date.
16:2.0.1.2.43.2.1.3SECTION 1203.32
   1203.32 Definitions.
16:2.0.1.2.43.2.1.4SECTION 1203.33
   1203.33 Certification testing.
16:2.0.1.2.43.2.1.5SECTION 1203.34
   1203.34 Product certification and labeling by manufacturers (including importers).
16:2.0.1.2.43.3SUBPART C
Subpart C - Recordkeeping
16:2.0.1.2.43.3.1.1SECTION 1203.40
   1203.40 Effective date.
16:2.0.1.2.43.3.1.2SECTION 1203.41
   1203.41 Recordkeeping requirements.
16:2.0.1.2.43.4SUBPART D
Subpart D - Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999
16:2.0.1.2.43.4.1.1SECTION 1203.51
   1203.51 Purpose and basis.
16:2.0.1.2.43.4.1.2SECTION 1203.52
   1203.52 Scope and effective date.
16:2.0.1.2.43.4.1.3SECTION 1203.53
   1203.53 Interim safety standards.
16:2.0.1.2.43.4.1.4.5APPENDIX
   Figure 1 to Part 1203 - Anatomical Planes
16:2.0.1.2.43.4.1.4.6APPENDIX
   Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes
16:2.0.1.2.43.4.1.4.7APPENDIX
   Figure 3 to Part 1203 - Location of Reference Plane
16:2.0.1.2.43.4.1.4.8APPENDIX
   Figure 4 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
16:2.0.1.2.43.4.1.4.9APPENDIX
   Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
16:2.0.1.2.43.4.1.4.10APPENDIX
   Figure 6 to Part 1203 - Field of Vision
16:2.0.1.2.43.4.1.4.11APPENDIX
   Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test
16:2.0.1.2.43.4.1.4.12APPENDIX
   Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength
16:2.0.1.2.43.4.1.4.13APPENDIX
   Figure 9 to Part 1203 - Impact Test Apparatus
16:2.0.1.2.43.4.1.4.14APPENDIX
   Figure 10 to Part 1203 - Center of Gravity for Drop Assembly
16:2.0.1.2.43.4.1.4.15APPENDIX
   Figures 11, 12 and 13 to Part 1203 - Hemispherical Anvil and Curbstone Anvil