Title 46

PART 170

Part 170 - Stability Requirements For All Inspected Vessels

PART 170 - STABILITY REQUIREMENTS FOR ALL INSPECTED VESSELS Authority:43 U.S.C. 1333; 46 U.S.C. 2103, 3306, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; Department of Homeland Security Delegation No. 0170.1. Source:CGD 79-023, 48 FR 51010, Nov. 4, 1983, unless otherwise noted.

46:7.0.1.2.5.1SUBPART A
Subpart A - General Provisions
46:7.0.1.2.5.1.59.1SECTION 170.001
   170.001 Applicability.
46:7.0.1.2.5.1.59.2SECTION 170.003
   170.003 Right of appeal.
46:7.0.1.2.5.1.59.3SECTION 170.005
   170.005 Vessel alteration or repair.
46:7.0.1.2.5.1.59.4SECTION 170.010
   170.010 Equivalents.
46:7.0.1.2.5.1.59.5SECTION 170.015
   170.015 Incorporation by reference.
46:7.0.1.2.5.1.59.6SECTION 170.020
   170.020 OMB control numbers assigned pursuant to the Paperwork Reduction Act.
46:7.0.1.2.5.2SUBPART B
Subpart B - Definitions
46:7.0.1.2.5.2.59.1SECTION 170.050
   170.050 General terms.
46:7.0.1.2.5.2.59.2SECTION 170.055
   170.055 Definitions concerning a vessel.
46:7.0.1.2.5.3SUBPART C
Subpart C - Plan Approval
46:7.0.1.2.5.3.59.1SECTION 170.070
   170.070 Applicability.
46:7.0.1.2.5.3.59.2SECTION 170.075
   170.075 Plans.
46:7.0.1.2.5.3.59.3SECTION 170.080
   170.080 Stability booklet.
46:7.0.1.2.5.3.59.4SECTION 170.085
   170.085 Information required before a stability test.
46:7.0.1.2.5.3.59.5SECTION 170.090
   170.090 Calculations.
46:7.0.1.2.5.3.59.6SECTION 170.093
   170.093 Specific approvals.
46:7.0.1.2.5.3.59.7SECTION 170.095
   170.095 Data submittal for a vessel equipped to lift.
46:7.0.1.2.5.3.59.8SECTION 170.100
   170.100 Addresses for submittal of plans and calculations.
46:7.0.1.2.5.4SUBPART D
Subpart D - Stability Instructions for Operating Personnel
46:7.0.1.2.5.4.59.1SECTION 170.105
   170.105 Applicability.
46:7.0.1.2.5.4.59.2SECTION 170.110
   170.110 Stability booklet.
46:7.0.1.2.5.4.59.3SECTION 170.120
   170.120 Stability letter.
46:7.0.1.2.5.4.59.4SECTION 170.125
   170.125 Operating information for a vessel engaged in lifting.
46:7.0.1.2.5.4.59.5SECTION 170.135
   170.135 [Reserved]
46:7.0.1.2.5.4.59.6SECTION 170.140
   170.140 Operating information for a vessel constructed on or after January 1, 2009 and issued a SOLAS safety certificate.
46:7.0.1.2.5.5SUBPART E
Subpart E - Intact Stability Criteria
46:7.0.1.2.5.5.59.1SECTION 170.160
   170.160 Specific applicability.
46:7.0.1.2.5.5.59.2SECTION 170.165
   170.165 International Code on Intact Stability.
46:7.0.1.2.5.5.59.3SECTION 170.170
   170.170 Weather criteria.
46:7.0.1.2.5.5.59.4SECTION 170.173
   170.173 Criterion for vessels of unusual proportion and form.
46:7.0.1.2.5.6SUBPART F
Subpart F - Determination of Lightweight Displacement and Centers of Gravity
46:7.0.1.2.5.6.59.1SECTION 170.174
   170.174 Specific applicability.
46:7.0.1.2.5.6.59.2SECTION 170.175
   170.175 Stability test: General.
46:7.0.1.2.5.6.59.3SECTION 170.180
   170.180 Plans and information required at the stability test.
46:7.0.1.2.5.6.59.4SECTION 170.185
   170.185 Stability test preparations.
46:7.0.1.2.5.6.59.5SECTION 170.190
   170.190 Stability test procedure modifications.
46:7.0.1.2.5.6.59.6SECTION 170.200
   170.200 Estimated lightweight vertical center of gravity.
46:7.0.1.2.5.7SUBPART G
Subpart G - Special Installations
46:7.0.1.2.5.7.59.1SECTION 170.235
   170.235 Fixed ballast.
46:7.0.1.2.5.7.59.2SECTION 170.245
   170.245 Foam flotation material.
46:7.0.1.2.5.8SUBPART H
Subpart H - Watertight Bulkhead Doors
46:7.0.1.2.5.8.59.1SECTION 170.248
   170.248 Applicability.
46:7.0.1.2.5.8.59.2SECTION 170.250
   170.250 Types and classes.
46:7.0.1.2.5.8.59.3SECTION 170.255
   170.255 Class 1 doors; permissible locations.
46:7.0.1.2.5.8.59.4SECTION 170.260
   170.260 Class 2 doors; permissible locations.
46:7.0.1.2.5.8.59.5SECTION 170.265
   170.265 Class 3 doors; required locations.
46:7.0.1.2.5.8.59.6SECTION 170.270
   170.270 Door design, operation, installation, and testing.
46:7.0.1.2.5.8.59.7SECTION 170.275
   170.275 Special requirements for cargo space watertight doors.
46:7.0.1.2.5.9SUBPART I
Subpart I - Free Surface
46:7.0.1.2.5.9.59.1SECTION 170.285
   170.285 Free surface correction for intact stability calculations.
46:7.0.1.2.5.9.59.2SECTION 170.290
   170.290 Free surface correction for damage stability calculations.
46:7.0.1.2.5.9.59.3SECTION 170.295
   170.295 Special consideration for free surface of passive roll stabilization tanks.
46:7.0.1.2.5.9.59.4SECTION 170.300
   170.300 Special consideration for free surface of spoil in hopper dredge hoppers.